lots of LT1 stuff, suspension, gfx, exhaust
08-06-2004, 04:54 PM
#1
Registered User
Thread Starter
Join Date: Apr 2004
Location: College Station, TX
Posts: 143
lots of LT1 stuff, suspension, gfx, exhaust
well turns out i need a lot of money pretty quickly. i have a lot of stuff to sell but most of it only goes for a good price. if you are interested then make me an offer, a reasonable one. i will be out of town for a couple days and haven't decided on anything for sure yet except the nitrous.
NX wet kit-complete kit, solenoids, liquid filled gauge, lines, wiring, bottle, 50 and 132 hp jets. nitrous has own post on here also.
suspension (all bmr and all powdercoated white, used for two months)- sway bars front solid 32 mm and rear solid 21 mm, lower control arms, maybe adjustable panhard rod (gotta see how stock one sits), sub frame connectors are brand new and still wrapped up, shock tower brace.
have a set of wings west w-type ground effects that were just painted arctic white a month ago and have been sitting waiting to be installed. they run 700 bucks without paint and i like them so nothing less than 750.
i have a flowmaster 80 series in place of the stock exhaust system that could be taken out or sold as whole and some stock tips.
if interested then e-mail me at roadrage912@hotmail.com
NX wet kit-complete kit, solenoids, liquid filled gauge, lines, wiring, bottle, 50 and 132 hp jets. nitrous has own post on here also.
suspension (all bmr and all powdercoated white, used for two months)- sway bars front solid 32 mm and rear solid 21 mm, lower control arms, maybe adjustable panhard rod (gotta see how stock one sits), sub frame connectors are brand new and still wrapped up, shock tower brace.
have a set of wings west w-type ground effects that were just painted arctic white a month ago and have been sitting waiting to be installed. they run 700 bucks without paint and i like them so nothing less than 750.
i have a flowmaster 80 series in place of the stock exhaust system that could be taken out or sold as whole and some stock tips.
if interested then e-mail me at roadrage912@hotmail.com
08-06-2004, 06:00 PM
#2
Registered User
Join Date: Sep 2003
Location: California
Posts: 805
Re: lots of LT1 stuff, suspension, gfx, exhaust
NX wet kit-complete kit, solenoids, liquid filled gauge, lines, wiring, bottle, 50 and 132 hp jets. nitrous has own post on here also.
What would you like to get for this. I don't know what nitrous kits go for. Does it have the bottle too? Thanks.
What would you like to get for this. I don't know what nitrous kits go for. Does it have the bottle too? Thanks.
08-07-2004, 09:47 PM
#3
Registered User
Thread Starter
Join Date: Apr 2004
Location: College Station, TX
Posts: 143
Re: lots of LT1 stuff, suspension, gfx, exhaust
Originally Posted by roadrage912
NX wet kit-complete kit, solenoids, liquid filled gauge, lines, wiring, bottle, 50 and 132 hp jets. nitrous has own post on here also.
i'll do 425 shipped, yes it comes with the bottle. this kit comes with everything needed to spray.
08-08-2004, 09:53 AM
#4
Registered User
Join Date: May 2004
Location: Holloman AFB, NM
Posts: 156
Re: lots of LT1 stuff, suspension, gfx, exhaust
Email me a price on ALL the suspension stuff...and we'll talk...
james.nobles@jbab.aorcentaf.af.mil
Thanks
james.nobles@jbab.aorcentaf.af.mil
Thanks
08-08-2004, 12:47 PM
#5
Registered User
Thread Starter
Join Date: Apr 2004
Location: College Station, TX
Posts: 143
Re: lots of LT1 stuff, suspension, gfx, exhaust
jamesnobles i tried to e-mail you but it didn't go through. i have recieved a few other e-mails and if you have contacted me under another e-mail address then just let me know, otherwise you'll hafta shoot me an e-mail 'cuz mine didn't go through. i will have prices posted up for all of the suspension hopefully by tomorrow and i will try and see if my stock panhard rod will work as soon as i head back to my house.
08-08-2004, 01:03 PM
#6
Registered User
Join Date: Apr 2004
Location: Texas
Posts: 947
Re: lots of LT1 stuff, suspension, gfx, exhaust
08-08-2004, 01:27 PM
#7
Registered User
Join Date: Nov 2003
Location: Texas
Posts: 147
Re: lots of LT1 stuff, suspension, gfx, exhaust
interested in the lca's and sfc's. email the info at tmgsix@yahoo.com Thanks, Travis
08-08-2004, 01:52 PM
#8
Registered User
Join Date: May 2004
Location: Holloman AFB, NM
Posts: 156
Re: lots of LT1 stuff, suspension, gfx, exhaust
Well ok....I am interested in it all if you want to sell it as a package...but you'll have to shoot me a price...I also do have cash in hand so If the price is right, you will have some money within a few hours.
08-08-2004, 02:51 PM
#9
Registered User
Thread Starter
Join Date: Apr 2004
Location: College Station, TX
Posts: 143
Re: lots of LT1 stuff, suspension, gfx, exhaust
ok, all these parts brand new were (each part also cost an extra $5 to be powdercoated white)
tubular lower control arms - $110+5
sway bars - $320+10 (no endlinks included)
adj panhard rod- $120+5 (don't know if i can sell it yet)
tubular sub frame connectors (which are new and still wrapped up)- $140+10
shock tower brace- $90+5
total new = $815 and with tax it was $880
i have no idea how much shipping will cost, probably a lot, but i see some of you are from texas and somnabulist you're from waco right, which is only an hour and 15 min away from college station. i will find out tomorrow if the panhard rod is for sale. any offers can be e-mailed to roadrage912@hotmail.com
tubular lower control arms - $110+5
sway bars - $320+10 (no endlinks included)
adj panhard rod- $120+5 (don't know if i can sell it yet)
tubular sub frame connectors (which are new and still wrapped up)- $140+10
shock tower brace- $90+5
total new = $815 and with tax it was $880
i have no idea how much shipping will cost, probably a lot, but i see some of you are from texas and somnabulist you're from waco right, which is only an hour and 15 min away from college station. i will find out tomorrow if the panhard rod is for sale. any offers can be e-mailed to roadrage912@hotmail.com
Last edited by roadrage912; 08-10-2004 at 08:47 PM.
08-09-2004, 12:58 AM
#11
Registered User
Thread Starter
Join Date: Apr 2004
Location: College Station, TX
Posts: 143
Re: lots of LT1 stuff, suspension, gfx, exhaust
looks like the kit is going to go all together as a set unless quite a few offers fall through. i'll send out e-mails tomorrow to the people i've already been e-mailing.
08-10-2004, 08:35 PM
#12
Registered User
Thread Starter
Join Date: Apr 2004
Location: College Station, TX
Posts: 143
Re: lots of LT1 stuff, suspension, gfx, exhaust
ok, sorry it took so long with the panhard rod, it rained on me so i couldn't get out there. the stock panhard rod works so the BMR adjustable one is for sale also. trying to get rid of this stuff pretty quick.
SFCs are brand new, still wrapped up so i'm looking for $150 for them.
adj panhard rod- $110
LCAs- $100
sway bars- $275 (polyurethane endlinks not included)
shock tower brace- $80
remember everything is still almost brand new (2 months on the car) and in perfect condition. prices do not include shipping. pick ups are welcome and i will meet some places in TX.
SFCs are brand new, still wrapped up so i'm looking for $150 for them.
adj panhard rod- $110
LCAs- $100
sway bars- $275 (polyurethane endlinks not included)
shock tower brace- $80
remember everything is still almost brand new (2 months on the car) and in perfect condition. prices do not include shipping. pick ups are welcome and i will meet some places in TX.
Last edited by roadrage912; 08-10-2004 at 08:54 PM.
