I have a few items for sale….I think that most if not all the prices listed are very reasonable, let me know if you think otherwise. I have 100% feedback as a seller on Ebay feel free to check it’s the same username. I live in Normal IL…PM me with questions.


LT1 long block- $950 firm
Its a 95 block with what I believe around 40k miles. Heads got pulled off about 8 months ago for a blown head gasket cylinders looked good some cross hatching still visible. I had the heads completely rebuilt with porting from a local shop and upgraded the valve springs (good to .55) in the hope that I would swap the cam out soon. So the upper end has all new gaskets. Great running motor when I replaced the head gaskets I ran a leak down test and all the cylinders were around 5% .I will sell it with the opti which was replaced 2 years ago and prolly only has 15k on it.
http://s118.photobucket.com/albums/o...t=CIMG0327.jpg

Video clip http://s118.photobucket.com/albums/o...t=CIMG0259.flv

SBC 383 block- $200

I had this block laying around that I was going to perform a build on it is a 350 block bored over .030 and clearanced to fit a 383 assembly in. I is a 4 bolt main block that is arp studed. The cylinders look really good the block has alittle surface rust from sitting around. Local pickup preffered
http://s118.photobucket.com/albums/o...t=CIMG0321.jpg
http://s118.photobucket.com/albums/o...t=CIMG0317.jpg
http://s118.photobucket.com/albums/o...t=CIMG0319.jpg
http://s118.photobucket.com/albums/o...t=CIMG0320.jpg

Valve Covers - Pending
Stock height chrome valve covers with chevy bowtie emblem. In very good shape.
http://s118.photobucket.com/albums/o...t=CIMG0301.jpg


SBC Polished Air Gap RPM intake - $70 + shipping
Not sure if it is edelbrock or a one off brand manifold but is in good shape just needs some good cleaning….has been sitting around the garage for awhile.
http://s118.photobucket.com/albums/o...t=CIMG0336.jpg

Stock front LT1 Struts- $30 + shipping
Stock struts from my 94’ camaro. They look to be in good shape not sure if they are the originals on my car if so then 100K plus on the mileage
http://s118.photobucket.com/albums/o...t=CIMG0304.jpg

LT1 True Double Roller Timing Chain- SOLD
With only 4,000 miles on it and is in great shape. Don’t know what brand
http://s118.photobucket.com/albums/o...t=CIMG0313.jpg

LS1 LG Strut Tower Brace- $75 + shipping
I bought it from someone that said it would fit my car and it didn’t, in very good shape.
http://s118.photobucket.com/albums/o...t=CIMG0316.jpg

SBC HEI Petronix Flame Thrower Coil and Distributor Cap- $25 plus shipping
Used of a few thousand miles before I went to a different setup.
http://s118.photobucket.com/albums/o...t=CIMG0329.jpg

LT1 F-body Flowmaster exhaust - $75
I have full exhaust from Y-pipe to muffler, no tips…It has been cut in the removal process and will need welded back together
Local pickup preffered
http://s118.photobucket.com/albums/o...t=CIMG0310.jpg

LT1 Stock Exhaust Manifolds- $40 + shipping
In great shape…nothing else to say
http://s118.photobucket.com/albums/o...t=CIMG0314.jpg

LT1 24lb injectors- $40 + shipping
Bought this set awhile ago from someone that said there was low miles on it….I ran them 8 thousand miles.
http://s118.photobucket.com/albums/o...t=CIMG0328.jpg

SBC Edelbrock RPM CAM And lifter Set- $90 + shipping
Heres a hydraulic cam that was used for only 300 miles or so. Still have the original box and receipt. Cost $197 new
http://s118.photobucket.com/albums/o...t=CIMG0335.jpg

SBC Performance Hydraulic Cam- $40 + shipping
6-7k miles on this cam it came in a 350/350hp motor from jasper. The cam specs are .488/.488 and 278/278. nice cam for a daily performance car.
http://s118.photobucket.com/albums/o...t=CIMG0331.jpg

Imperial 16’ Electric fan- $30 + shipping
Practically new 16 inch electric fan in box.
http://s118.photobucket.com/albums/o...t=CIMG0330.jpg

 

Just so you know, none of your pics are working for me.

Kevin

 

Links are up and running....sorry about that

 

does the LT1 double roller chain come with the gears? also what brand is it? thanks

 

yes that comes with the gears...don't know brand was in a motor when i got it.

 

will you do 40 shipped to 65340? thanks

 

PM sent

 

chain sold? interested!

 

Timing chain is sold

 

ttt...

 

Still have alot of stuff for sale...I'm moving out of this house soon so will take offers

 

Stuff is up on Ebay http://motors.search.ebay.com/_W0QQsassZchevyguy358