Lots of F-body and misc. parts available!
Thread Starter
Registered User
Joined: Dec 1998
Posts: 669
From: Kansas City
Lots of F-body and misc. parts available!
FMS 24# injectors: (functions as a 26#er in a GM). Used in my cam-only setup for 2 years. I'm unsure of the mileage. I pulled them out when I built the motor and the turbo kit. The car ran great with these injectors on a 220/230 cam with no tune! All the o-rings are present and in good condition. The Ford part number is F1TE-05A. On the other side is the number 0 280 150 947. One of the plastic pintle caps cracked, so I took it off. This is a common problem and does not effect the function of the injector. As I stated, I ran for 2 years with these injectors with no problems! $80 shipped!
Baer bumpsteer correction kit: BRAND NEW! This is the Baer Tracker bumpsteer correction kit that replaces the factory tie rod ends with a nice high quality spherical bushing. They're red anodized with the Baer logo and come with all the included spacers. These really help correct bumpsteer on lowered cars! I bought these for my Camaro a couple of years back and never got around to installing them. Rksport sells these for $142.95 plus shipping. http://www.rksport.com/product/p_010321010/view_detail Get them from me for $110 shipped!
K&N conical air filter: This is a monster 4" inlet, 9 inch long air filter. It was used briefly on a cold air kit I fabbed for my Camaro before I built the turbo kit. Very little mileage with no holes or tears in the filter media. This filter sells for around $60 new. $35 shipped!
Painless Wiring "Cirkit Boss Circuit Isolator": This is an auxiliary fuse block with an integrated relay. It adds 4 ignition hot and 3 constant hot circuits to your existing electrical setup. I was going to use it to control a nitrous system, bottle warmer, remote bottle opener, electric water pump, and aftermarket foglights on my Camaro before I tore it down to build the turbo. It's new in the plastic container. It's the part number 70107 seen here on Painless Wiring's website: http://www.painlesswiring.com/webca...t-fuseblock.htm Retails for ~$55-$60 plus shipping. Buy it from me for $40 shipped!
Chrome Corvette ZR1 wheel centercaps: These came with the ZR1 wheels that are on my Camaro. Less than 300 miles on these! I'm replacing them with SS caps. They're the exact caps seen in this ebay auction: http://cgi.ebay.com/ebaymotors/ws/e...7967993908&rd=1 $40 shipped!
Pocket bike- 45cc sport-bike style pocket bike: Black fairings with stock silver frame and wheels. Modified with K&N air cleaner, velocity stack, heat wrapped exhaust pipe, and high-flow home-built muffler. Also comes with a timing key set (uninstalled), and an aftermarket rear sprocket for a higher top speed (also uninstalled). As it sits this bike is good for ~30mph. It's a blast! It's time for me to move on to something else. $200 with everything! (available for local pickup only).
Factory '95 Z28 limited slip: I'm unsure of the mileage on this unit. I took this out of a customer's diff to install a Torsen diff. It still functions well. $50. Local pickup or delivery only, please.
PM me, Email me: Chrisbequick@yahoo.com, or call me, (913) 980-3335 with questions.
-Chris
Baer bumpsteer correction kit: BRAND NEW! This is the Baer Tracker bumpsteer correction kit that replaces the factory tie rod ends with a nice high quality spherical bushing. They're red anodized with the Baer logo and come with all the included spacers. These really help correct bumpsteer on lowered cars! I bought these for my Camaro a couple of years back and never got around to installing them. Rksport sells these for $142.95 plus shipping. http://www.rksport.com/product/p_010321010/view_detail Get them from me for $110 shipped!
K&N conical air filter: This is a monster 4" inlet, 9 inch long air filter. It was used briefly on a cold air kit I fabbed for my Camaro before I built the turbo kit. Very little mileage with no holes or tears in the filter media. This filter sells for around $60 new. $35 shipped!
Painless Wiring "Cirkit Boss Circuit Isolator": This is an auxiliary fuse block with an integrated relay. It adds 4 ignition hot and 3 constant hot circuits to your existing electrical setup. I was going to use it to control a nitrous system, bottle warmer, remote bottle opener, electric water pump, and aftermarket foglights on my Camaro before I tore it down to build the turbo. It's new in the plastic container. It's the part number 70107 seen here on Painless Wiring's website: http://www.painlesswiring.com/webca...t-fuseblock.htm Retails for ~$55-$60 plus shipping. Buy it from me for $40 shipped!
Chrome Corvette ZR1 wheel centercaps: These came with the ZR1 wheels that are on my Camaro. Less than 300 miles on these! I'm replacing them with SS caps. They're the exact caps seen in this ebay auction: http://cgi.ebay.com/ebaymotors/ws/e...7967993908&rd=1 $40 shipped!
Pocket bike- 45cc sport-bike style pocket bike: Black fairings with stock silver frame and wheels. Modified with K&N air cleaner, velocity stack, heat wrapped exhaust pipe, and high-flow home-built muffler. Also comes with a timing key set (uninstalled), and an aftermarket rear sprocket for a higher top speed (also uninstalled). As it sits this bike is good for ~30mph. It's a blast! It's time for me to move on to something else. $200 with everything! (available for local pickup only).
Factory '95 Z28 limited slip: I'm unsure of the mileage on this unit. I took this out of a customer's diff to install a Torsen diff. It still functions well. $50. Local pickup or delivery only, please.
PM me, Email me: Chrisbequick@yahoo.com, or call me, (913) 980-3335 with questions.
-Chris
Registered User
Joined: Mar 2005
Posts: 225
From: Iowa
Re: Lots of F-body and misc. parts available!
I'm interested in the filter but I'm new to the CAI that I have. Can you send me a pic or link to what it looks like so I can match it up for referance.
wetpavement@hotmail.com
thanks
wetpavement@hotmail.com
thanks
Thread
Thread Starter
Forum
Replies
Last Post
carcrazyQT
Site Help and Suggestions
15
Sep 17, 2002 07:54 AM