lots of chevy stuff.. 56k no
Thread Starter
Registered User
Joined: Aug 2007
Posts: 156
From: walnutport, PA
lots of chevy stuff.. 56k no
- 62-67 Nova Hurst 4spd linkage with shifter bracket – 30.00
- 32” hydraulic hose with compression fitting- 30.00
- 73-87 Chevy/GMC truck overflow tank- 5.00
- 94-00 4cylinder s10/sonoma hydraulic clutch hose. Form reservoir to slave cylinder- 5.00
- 94-00 4cylinder s10/Sonoma power steering reservoir fill/check tube- 5.00
- 93-98 Jeep Grand Cherokee pitman arm- 10.00
- 93-98 Jeep Grand Cherokee collapsible steering shaft- 10.00
- 73-87 Chevy/GMC automatic on the column shift lever- 2.00
- 55-86 stamped small block chevy timing cover with timing tab (tab for 78-86 engines)- 5.00
- Ford Windstar electric fans. Worked when pulled, but missing all hardware- 15.00
- 94-97 Pontiac Trans-Am factory Air box and elbow. Elbow has tear where it meets throttle body. This is for a MAF car, can be made to work with 93 speed density cars with different elbow. Filter, elbow, and box included.- 50.00
- 93-02 Fbody 3.23 rear gears with yoke, great shape, no noise.- 25.00
I can make deal for entire rear, comes with Auburn posi, but would need new spider gears and posi rebuild. Or entire rear for $100.00
- (8) Polished Powdered Metal connecting rods – 40.00
- 70-72 Chevelle stock flat hood. hood pin holes, In lacquer primer. 40.00
- 71-72 Chevelle front bumper, should be re-chromed – 25.00
- (1) 71-72 Chevelle Rear Bumper, in decent condition, straight – 40.00 each
- 70-72 Chevelle rocker panel molding, decent shape – 40.00
- 1971 336x 350 heads. 76cc chambers, 194/150 valves, slight port clean up. Z28 valve springs. needs valve guides. 40.00
- 87+ 1pc rear seal oil pan. good condition. stock pan, 10.00
- 68-72 rear springs. taken from 71 chevelle. stock height, and rate. 20.00
- 68-72 A-body dual pigtail variable rate springs. 14" height less than 2k miles- 60 pair
- (2) 15x8 Cragar S/S rims, decent chrome, grey painted spokes, 4" backspacing- 50.00 pair
everything is sold AS IS. Make offers. i have pictures, just ask.
- 32” hydraulic hose with compression fitting- 30.00
- 73-87 Chevy/GMC truck overflow tank- 5.00
- 94-00 4cylinder s10/sonoma hydraulic clutch hose. Form reservoir to slave cylinder- 5.00
- 94-00 4cylinder s10/Sonoma power steering reservoir fill/check tube- 5.00
- 93-98 Jeep Grand Cherokee pitman arm- 10.00
- 93-98 Jeep Grand Cherokee collapsible steering shaft- 10.00
- 73-87 Chevy/GMC automatic on the column shift lever- 2.00
- 55-86 stamped small block chevy timing cover with timing tab (tab for 78-86 engines)- 5.00
- Ford Windstar electric fans. Worked when pulled, but missing all hardware- 15.00
- 94-97 Pontiac Trans-Am factory Air box and elbow. Elbow has tear where it meets throttle body. This is for a MAF car, can be made to work with 93 speed density cars with different elbow. Filter, elbow, and box included.- 50.00
- 93-02 Fbody 3.23 rear gears with yoke, great shape, no noise.- 25.00
I can make deal for entire rear, comes with Auburn posi, but would need new spider gears and posi rebuild. Or entire rear for $100.00
- (8) Polished Powdered Metal connecting rods – 40.00
- 70-72 Chevelle stock flat hood. hood pin holes, In lacquer primer. 40.00
- 71-72 Chevelle front bumper, should be re-chromed – 25.00
- (1) 71-72 Chevelle Rear Bumper, in decent condition, straight – 40.00 each
- 70-72 Chevelle rocker panel molding, decent shape – 40.00
- 1971 336x 350 heads. 76cc chambers, 194/150 valves, slight port clean up. Z28 valve springs. needs valve guides. 40.00
- 87+ 1pc rear seal oil pan. good condition. stock pan, 10.00
- 68-72 rear springs. taken from 71 chevelle. stock height, and rate. 20.00
- 68-72 A-body dual pigtail variable rate springs. 14" height less than 2k miles- 60 pair
- (2) 15x8 Cragar S/S rims, decent chrome, grey painted spokes, 4" backspacing- 50.00 pair
everything is sold AS IS. Make offers. i have pictures, just ask.
Last edited by ssclone; Nov 23, 2009 at 03:56 PM.
Registered User
Joined: Jan 2009
Posts: 404
From: Northwest Corner Ohio, Wauseon
If thats a Fourth Gen rear end and has at least 3.42 rear gears, it will sell fast on ThirdGen.org. Otherwise good luck selling Nova and not Camaro Firebird parts on a F-body site. 
Thread Starter
Registered User
Joined: Aug 2007
Posts: 156
From: walnutport, PA
never know what other members have,
the rods are 96+ vortec powder metal rods. same things in our LT1's
yes the rear is from a 94, but has LS1 axles, but 3.23 gears. the posi is shot though, but gears and axles are still good.
aaron
the rods are 96+ vortec powder metal rods. same things in our LT1's
yes the rear is from a 94, but has LS1 axles, but 3.23 gears. the posi is shot though, but gears and axles are still good.
aaron