Hey all, have a LT1 conversion in my 89 S-10, just did LT4 conversion. Motor came out of a 94 camaro, but was a replacement motor, car had 65k original on it, but this motor is 4 bolt main and has huge GM rebuilt sticker on the tranny, so everything listed is under 65k, think everything was replaced in 96.. ALL IGNITION RELATED PARTS ARE FOR GEN I OPTI!!!!!

Stock intake (have egr valve and solenoid attached), P/N: 10108630 $50 + shipping

Stock Cam, #s on end: 241 15f 7308 GMPT BC $15+ shipping

Gen I timing cover, opti drive, gen I opti harness, and cam driven water pump drive $20 + shipping

Water pump coupling $20 shipped

Stock 48mm throttle body, air foil, no sensors or bottom coolant passages $50 + shipping

Stock Timing chain $15 shipped?

Stock heads, fully built, springs, valves, retainers, studs, rockers, and head bolts P/N: 12551561, one header bolt hole needs a helicoil $225 + shipping. SOLD!!
Stock 24# injectors, screens were clogged w/ rust from old fuel line, cleaned them out, truck ran fine, need new screens installed but run good. $25 shipped SOLD / SHIPPED!!

Have pictures of EVERYTHING (2048x1536), please email me for pics if interested :

I know I am not widely known around here, you can check me out over at www.s-seriesforum.com, Hotwire there too.

Have paypal and ship everything USPS, right down the road from my work, usually ship during lunch hour.

Thanks,

Jeff

 

Hey Hotwire,

Its Nate from S-Seriesforum.com

I'm interested in the intake manifold and possibly the throttlebody.

Send me a PM over on the forum.

Nate

 

I will vouch for Jeff. He's a great person to deal with.

 

Thanks Ion!

Nate, PM on the way.

 

Damn the s-10 guys are everywhere..........

 

lol, ya'll wreck em, we resurrect em!!

Can you blame us either? The surprise factor, the astonishment factor, insurance $116 every 6 months, $22 a year for taxes... more room to change the plugs, can haul *** and the trash... hehehe

 

Hey I am one too!

 

ttt

 

ttt

 

up up and away...

 

ttt, negotiable, lemme know!

 

ttt

 

negotiable, looking for trades too!

2800-3200 4l60e lockup stall converter, meziere wp, s-10 96-97 pcm bracket that goes on overflow canister, 82-93 s-10 rear sliding window, vette valve covers, vette injector covers, underdrive pulleys.

Open up your hearts and your homes (wallets too!!)

Thanks,

Jeff

 

I am intersted in the heads, would they bolt right on to the 93 lt1? would be interested to have second set for porting, would like just bare heads of possible, or heads minus springs/rockers.

let me know
-Max
aeromaks@aol.com

 

Hey Eric (yorkie), yeah, I got your stuff in my motor, you'll have to come take a ride, it is wicked! Also, found new ways to program motor / datalog, so if you need anymore help, let me know.

Aeromaks, yes, they will bolt right up to a 93. They are complete, rockers, valves, springs, etc, just unbolted them, set them aside, and installed my LT4 heads.

I still have everything for sale, minus the injectors.