Joe Overton cam
I have a cam that I got from Joe that is setup for a LT1 383 with 12.1 comp It is 240/248@50 with around 550 lift with 1.5RR It has less than 300 miles on it and looks new. I am going to a solid roller. I will take 200.00 firm or a will just keep it. I paid 400 for. Pm me if you are interested
|
Re: Joe Overton cam
TTT
Still for sale Last call for a great cam |
Re: Joe Overton cam
|
Re: Joe Overton cam
what kind of power did you make with this cam? is it streetable?
|
Re: Joe Overton cam
I made 380rwhp through a TH400 with a 3800 stall converter with a 11.20 afr and letting out at 5700rpm due to a new motor I did not want to push it. The cam should of peaked at 6500rpm or a little more. This is all with a 383 motor The cam is made for a vented opti. But can be cut down for a nonvented opti
With my 383 I had 13in of vacuum. If that tells you how streetable it may be? It is a very lopy Idel thgough. It did drive good before I ended up having problems somewhere else though. The DCR WAS 8.0 WITH MY MOTOR AND A 12.1 CR. So I would check what it would be on your motor other wise this cam would make your car a slouch if it is too much lower. In other words you will need around 12.1 comp to make this cam happy. :D |
Re: Joe Overton cam
Cliff,
This is Mike, Just talked to you over phone. Just wanted to let ya know who you was talking too. Talked to Glenn, Send him the specs and a shipping quote. Think he want the cam. Later, Mike |
Re: Joe Overton cam
Yes sir I will take it :) Just send me the info like you told Mike on the phone and we will talk to details out.
Thanks again |
Re: Joe Overton cam
The cam is sill for sale at the time. Last Call
|
Re: Joe Overton cam
As said above and in your PM I will take the cam :)
|
All times are GMT -5. The time now is 06:50 AM. |
© 2024 MH Sub I, LLC dba Internet Brands