Hypertech Thermomaster Chip for 93 LT1 M6...
Thread Starter
Registered User
Joined: Jun 2001
Posts: 822
From: Lawrence, KS, USA
Hypertech Thermomaster Chip for 93 LT1 M6...
This is Hypertech's aftermarket piggyback chip for all 93 LT1 Camaros & Firebirds with an M6. I can't honestly tell you if I noticed the gains from it or not, since at the time my car had not been running for a year, was swapped to an M6, installed 1.6 RR's & springs, and ported my intake and installed a 58mm T/B...
, but I can tell you while running this chip, I've been running around all this summer & last summer w/o an air deflector on my radiator, and my temp has never went above 180* in the city, and 200* when driving @ 80 mph for an hour on the highways. This chip apparently controls spark advance & a/f ratio = HP gains.
This is a good "stepping stone" chip, meaning it's non-specific programming makes it usable on any bolt-on car. I'm selling mine because I just did heads & cam, and I had to have a custom chip finally burned. This chip retails for $150-$200 on most websites. I'll part with mine for $60 shipped OBO.
, but I can tell you while running this chip, I've been running around all this summer & last summer w/o an air deflector on my radiator, and my temp has never went above 180* in the city, and 200* when driving @ 80 mph for an hour on the highways. This chip apparently controls spark advance & a/f ratio = HP gains. This is a good "stepping stone" chip, meaning it's non-specific programming makes it usable on any bolt-on car. I'm selling mine because I just did heads & cam, and I had to have a custom chip finally burned. This chip retails for $150-$200 on most websites. I'll part with mine for $60 shipped OBO.
Last edited by FuryZ28; Jun 19, 2003 at 04:36 AM.
Thread Starter
Registered User
Joined: Jun 2001
Posts: 822
From: Lawrence, KS, USA
How about $50 shipped, guys? If you have a mostly stock 93 M6 LT1 and want a little added HP w/o paying for a completely custom chip (pointless IMO until you get gears, heads, cam, injectors, etc...) $50 bucks takes it. These chips in particular go for nearly $200 new...
Thread Starter
Registered User
Joined: Jun 2001
Posts: 822
From: Lawrence, KS, USA
Whoever wants to buy this chip, please PM me and give me a good idea what's going on and when exactly the $$ can be sent. I don't like just holding on to this with people saying "I want it", but no one telling me when they "want it" or how they're gonna "get it".
Thread Starter
Registered User
Joined: Jun 2001
Posts: 822
From: Lawrence, KS, USA
Bump...this chip is still for sale. If interested, PM me or send me an e-mail to SGFuryZ@hotmail.com
