Huge List of LT1 parts, Stock & Performance
Unless otherwise listed all parts work with 93-97 LT1 F-bodies and PLUS Shipping. Paypal accepted and preferred.
STOCK Alternator - $25 Starter - $25 Power steering pump w/ pulley - $25 Accessory bracket (for ps pump, ac, alt), powder coated gray - $40 Upper radiator support/shroud - $20 Fuel Pump/sender - $50 O2 sensors - $35 per pair MAF stock with screen - $40 MAF Ported with no screen or center bar - $50 A4 & M6 Radiator - $50 Fans - $60 A4 transmission crossmember - $20 M6 Transmission crossmember - $45 Flexplate - $20 OBDI and OBDI pcms (will need programmed to your specific car) - $65 EBCM/ABS module/block - $25 Windshield wiper arms, $20 per side, $30 for both Good working condition ac delco opti with 10k on it (95-97) - SOLD Good working ac delco opti with 15k on it for 92-94 - $125 Vented opti electric and vaccum harness - $25 for the pair Pair of 97-02 Tail lights - $30 each or $50 for both Automatic Shifter assembly - $30 Automatic pedals - $30 Side mirror in black, sebring silver - $25 each side or $40 for both Stock harmonic balancer pulley - $20 Black Berger panel - $85 Stock valvecovers - $15 Stock Oil Pan - $25 Stock valvecovers powdercoated red - SOLD Rear main seal retainer, aluminum stock piece - $25 AFTERMARKET/PERFORMANCE Morel Linkbar hydraulic roller lifters, very low mileage - $300 Dynaspark Optispark for 92-94, converts your Gen I opti into vented without needing to convert anything else (was new on Nov 10, used during summer of '11 for 8k) - $375 Dynaspark - The last distributor you'll ever have to buy JEGS SFI balancer and hub - SOLD Aluminum Polished Valve covers with notch for alternator - SOLD ATI neutral balance flexplate - SOLD Granatelli MAF - $125 March Underdrive pulley for crank pulley, with bolts & belt- $45 Maximum ported LT4 Intake manifold, pm for more details, no longer powder coated - $375 MSD Coil 92-95 - $25 Taylor OTVC wires black without mounts - $60 Ebay CAI - SOLD Madman altenator relocation bracket - SOLD LT4 ED timing chain set - SOLD Moroso 7 quart pan, black (similar to canton design without trap doors), specifically made for LT1 F-bodies. Comes with pickup needed - $200 Canton 242t oil pan, modified and sort of cobbled for fitment on a turbo car, will need repaired/rewelded, email for pics - $50 Pairs of poly endlinks (front or rear) - $15 |
Re: Huge List of LT1 parts, Stock & Performance
Bump it up! UMI torque arm is sold! Spintech exhaust sold!
|
Re: Huge List of LT1 parts, Stock & Performance
got a pic of those polished Alum valve covers? Brand?
|
Re: Huge List of LT1 parts, Stock & Performance
http://img32.imageshack.us/img32/2899/031bm.th.jpghttp://img839.imageshack.us/img839/7407/032xhc.th.jpghttp://img27.imageshack.us/img27/8642/033je.th.jpghttp://img840.imageshack.us/img840/6567/034eg.th.jpghttp://img713.imageshack.us/img713/1338/035wq.th.jpghttp://img835.imageshack.us/img835/1980/036lb.th.jpg
Here are some pictures of the v/cs. I don't really know the brand on them as it isn't stamped or cast into them anywhere. Only thing thats cast into them is SSI on the underside which doesn't mean anything to me?? |
Re: Huge List of LT1 parts, Stock & Performance
hey doug send me a pic of the morels?
|
Re: Huge List of LT1 parts, Stock & Performance
Here are some Morel pics for ya also sent em to your inbox....
http://img832.imageshack.us/img832/9056/011smd.th.jpghttp://img855.imageshack.us/img855/3851/012qe.th.jpghttp://img804.imageshack.us/img804/3002/007jn.th.jpghttp://img845.imageshack.us/img845/4382/008mlw.th.jpghttp://img545.imageshack.us/img545/5511/009wne.th.jpghttp://img513.imageshack.us/img513/7281/010pqq.th.jpg |
Re: Huge List of LT1 parts, Stock & Performance
What condition is the MAF sensor in?
|
Re: Huge List of LT1 parts, Stock & Performance
i need an obd1 pcm pm me plz or email at almarji13@gmail.com
thanks |
Re: Huge List of LT1 parts, Stock & Performance
^^^ Sent you a pm on the pcm.
Originally Posted by 97z28k&N
(Post 6872722)
What condition is the MAF sensor in?
|
Re: Huge List of LT1 parts, Stock & Performance
Polished valve covers, 1 LT4 ED timing set, powder coated valve covers, ALL SOLD!
|
Re: Huge List of LT1 parts, Stock & Performance
How much for the driveshaft shipped to 31601?
|
Re: Huge List of LT1 parts, Stock & Performance
How is the paint on the Berger pannel ? I"m kinda picky.
|
Re: Huge List of LT1 parts, Stock & Performance
Sent a pm on the driveshaft
Originally Posted by rpmatredline
(Post 6874113)
How is the paint on the Berger pannel ? I"m kinda picky.
|
Re: Huge List of LT1 parts, Stock & Performance
Thanks anyway..I'd rather you be honest than me be unhappy.:yes:
|
Re: Huge List of LT1 parts, Stock & Performance
Pics of the canton oil pan please? I have a welder so I can make repairs, and will it fit on a lt1 crossmember?
does the madman relocation include the belt? |
All times are GMT -5. The time now is 04:30 AM. |
© 2024 MH Sub I, LLC dba Internet Brands