What the hell, between the lowballers, non-paying bidders and what not im sick and tired of this car. So, heres the parts list, if you need something give me an offer on it, hell i dont really know what most of this is worth so give me an offer on any of it! Prices do not include shipping. The car has 36k miles on it, anything aftermarket has at most 9k on it. I wont start parting until i have a decent list made up of sold parts, but if you call dibs its yours, will probably start on it in 2 weeks.

Vortech V-7 YSi trim blower, twin plate brackets, 10-rib, all the piping, bolts, FMIC and Tial Q BOV. This setup will make an easy 7-800whp and will go to 900 easy with the 2.75" pulley if you can keep the belt from slipping. Uses a belt you can get at NAPA, special order for about $35. Manual tensioner and all parts are off the shelf stuff that i modified to work, new pullies for the blower just need a small modification to get the spacing right, takes about 3 min to do at a machine shop, belt looks perfect at almost 3000 miles this year, BOV is very loud and this setup sounds just insane. There is 1 chip on the edge of the air filter inlet (machined area to clamp to) but it is not a problem
$3800/offer

9" rear, I think its a Strange housing, has 35 spline axles, gun drilled and star flanged. Spool, richmond 3.70s, Moser aluminum throughbolt center section. Bolt it in and go, this will take more power than a LTX can make
$2400/offer

T-56, wide ratio trans, shifts perfect, excellent synchros and no grinding or problems. McLeod street twin, (think theres a billet flywheel in there, wont know till i take it off) billet hydraulics, M6 pedals, Hurst billet shifter. Everything you need for a high power M6 swap along with aftermarket alum driveshaft for 9"
$2200/offer

17x9.5" SLP ZR1 rims, in perfect shape with no rash, no stains, 3 tires with 70% and one that is 15%
$650/OFFER, i dont know what to ask for them

Powerstop rotors and stock calipers with pretty good VGX pads, these are like new yet and are slotted/drilled
$75/offer

KYB AGX struts/shocks with stock springs, have about 7k miles on them
$110/offer

BMR rear swaybar
$60
BMR LCA's
$60
Spohn chassis mount Tq arm with straight mount and 2 DS loops
$140

ENGINE------------------
Victory Racing stage 4 "victory lane" 355, will sell as a longblock or complete with intake/injectors/etc.
Stock unported heads, 918 springs, Ti retainers, 1.54 comp pro mags, pushrods, Bret Bauer cam specifically for this blower motor, ported intake, 65# mototron injectors, Aeromotive FPR,
Big Block snout/front cover, ATI damper, fully forged for boost and 9.2:1 with stock cc heads, milodon pan, everything is top knotch, main studs, headstuds, you name it
$MAKE OFFER WITH WHAT YOU WANT

Pacesetter ceramic coated LTs with 3" v-bands and dual 3" exhaust with x-pipe and magnaflow mufflers, sounds amazing, no emmisions
$450/offer

Delteq coilpack setup with fan shroud mount
$240/offer

CSR water pump, only 600 miles on it, the entire pump setup
$150/offer

Lonnies twin intank walbros with plug and play harness
$340/offer

All body/interior parts are up for grabs, Patriot red metallic exterior, black cloth interior. everything is pretty much mint, or i will sell the body complete, just post up what you want with an offer! would prefer to sell the complete chassis, no rust anywhere

Theres alot more there, you know what you need so just ask, i want this entire car gone in a month, no big time lowballing, but reasonable offers. I will not ship engine/trans/rear or large body parts but can arrange delivery of multiple items at the same time once they are sold, to chicago or denver area

Gary

 

I call dibbs on the lca's are they boxed and black? If so is that price shipped? If not what's the price shipped to 42728? Also is the csr mounted to an ac delco pump housing?

 

Is the $110 for all 4 struts? If so, whats your price to 01719?

Thanks

 

what kinda power did the motor make n/a?

 

does around 340whp N/A, ported heads would take it to ~400whp or so. Makes closer to 600whp the way it sits

 

Is the price on the struts for all 4?

 

Interested in the pump, is it in the housing and does the wiring come with it?

 

I pmed ya and I got no answere. Do you have pics of the torque arm setup?

 

ill be answering pms shortly, i have gotten so many today i need to write this stuff down as its listed on a couple sites.

 

Interested in BMR rear sway bar depending on size/diameter. Thanks.

 

Bump up - still waiting on an answer on the struts

 

Interested in any trades for the rear?

 

is torque arm adjustable?

 

I hope so!
I replied on LS1tech for the fogs (need the brackets as well) & the side skirts please.

 

the car is pending sale tomorrow so ill update this thread monday!