HI HP LTX PART OUT 640rwhp!
Thread Starter
Registered User
Joined: Feb 2001
Posts: 255
From: milwaukee, wi
HI HP LTX PART OUT 640rwhp!
I will post parts as I price them etc. I will start with the custom procharger setup.
--TrickFlow heads fully ported by Lloyd Elliot all the trick done fully assembled to handle a big cam! The work into them was $1700 on top of the $1000 for the heads. I am asking $1700 or $1950 with the Crower rockers and pushrods. These heads flow great!
-Custom 12 rib D1SC procharger setup for LTX. Complete with hard intake, vortech race blow off valve, custom speed inc front mount intercooler, 4.0 and 3.4 pullies etc. This is not a "basic" kit! A lot of time and money was spent on this set up and it has only 650 miles on it max. Will include extra procharger oil. Pipes are powder coated black and everything is in great shape! $4300 obo. Motor was pictured in GMHTP but can't remember the issue lol!
-Boost built 383 LTX shortblock. Best of the best parts.
Callies dragonslayer crank, Oliver billet 5.85 rods, JE pistons -31cc, callies 4 bolt mains, Hellfire rings, race coated bearings, balanced, decked, torque plate everything! Tom(badls1) can vouch for the build quality as he saw it before being installed. custom speed inc blower cam 640rwhp and very streetable, true roller timing set. Built to handle 1000hp. I have the build sheets and the motor was over $6500 new! Less then 650 miles on it. $4000 for the shortblock or 6500 with LE full port trick flow heads and fully ported LT4$$ intake, arp head studs, crower rockers, canton pan etc etc.
I have tons of parts from BigStuff3 to LE TFS heads etc etc. I will update this post. All price are obo. Any request for parts pm me it all has to go. Everything is still installed and can be seen in person in the Milwaukee area. If you want it I probably have it.
--TrickFlow heads fully ported by Lloyd Elliot all the trick done fully assembled to handle a big cam! The work into them was $1700 on top of the $1000 for the heads. I am asking $1700 or $1950 with the Crower rockers and pushrods. These heads flow great!
-Custom 12 rib D1SC procharger setup for LTX. Complete with hard intake, vortech race blow off valve, custom speed inc front mount intercooler, 4.0 and 3.4 pullies etc. This is not a "basic" kit! A lot of time and money was spent on this set up and it has only 650 miles on it max. Will include extra procharger oil. Pipes are powder coated black and everything is in great shape! $4300 obo. Motor was pictured in GMHTP but can't remember the issue lol!
-Boost built 383 LTX shortblock. Best of the best parts.
Callies dragonslayer crank, Oliver billet 5.85 rods, JE pistons -31cc, callies 4 bolt mains, Hellfire rings, race coated bearings, balanced, decked, torque plate everything! Tom(badls1) can vouch for the build quality as he saw it before being installed. custom speed inc blower cam 640rwhp and very streetable, true roller timing set. Built to handle 1000hp. I have the build sheets and the motor was over $6500 new! Less then 650 miles on it. $4000 for the shortblock or 6500 with LE full port trick flow heads and fully ported LT4$$ intake, arp head studs, crower rockers, canton pan etc etc.
I have tons of parts from BigStuff3 to LE TFS heads etc etc. I will update this post. All price are obo. Any request for parts pm me it all has to go. Everything is still installed and can be seen in person in the Milwaukee area. If you want it I probably have it.
Last edited by Randy Molkentine; Sep 16, 2009 at 01:36 PM.
Registered User
Joined: Oct 2002
Posts: 1,875
From: Wisconsin
berlin not sure would like to put your set in my z and sell whats in there but thats not realistic, what are the specifics and price for the heads? what did you have for a trans? are you prting the whole car or just the motor
Thread
Thread Starter
Forum
Replies
Last Post
Hotrods&Muscle
LT1 Based Engine Tech
24
Jan 18, 2015 08:08 PM
