Guaging interest in Fully Ported AFR 210's flow 322.5/251.7 @700
Thread Starter
Registered User
Joined: Nov 2002
Posts: 205
From: Lufkin, TX
Guaging interest in Fully Ported AFR 210's flow 322.5/251.7 @700
I spun a bearing this past week and im thinking about putting my stock motor back in my car. I have a bad *** set of AFR's and Matching LT4 intake. Porting done by Steve Haytek. These heads made 450RWHP on my 92 357ci LT1 Corvette thru a 3600 Vig converter and a 4.30 gear. These will be cleaned up and ready to go. Springs and valve job have around 30 passes. This combo should make 500RWHP with a properly setup stroker. The heads are setup for a solid roller currently. I have ran a best ETof 11.12 and a best MPH of 126.55 with these heads in a stock trimmed 92 with a cage and a/c.
E-mail me with questions@ dragracr_1@hotmail.com
E-mail me with questions@ dragracr_1@hotmail.com
Registered User
Joined: Nov 2001
Posts: 648
From: Richardson, TX USA
