I am gauging interest on my nitrous setup. Works excellent but considering going another route with my car. I am NOT looking to separate anything. The price for the following is $1,000 firm plus shipping costs. Would easily cost close to double the asking price if you were to do this brand new with the same parts. If you are local I can assist in the install one weekend. Parts are still on the car so if you are ready to buy, I need a day or so to remove it (during a weekend).

I literally sprayed one full bottle through this setup (if that). Some of the parts that were purchased used (such as the solenoids and such) look outstanding. No corrosion and wear on anything. This kit has everything you need from start to finish to be complete and spray safely.

-TNT F2 Fuel and Nitrous solenoids (with brackets)
-NOS purge solenoid
-Nitrous Outlet plate (52mm) with custom cut hard-lines
-Various jet sizes
-NANO Nitrous 3000psi kit (will include a fill adapter I had to separately purchase)
-Custom steel braided blowdown hose with AN fittings and a bulkhead fitting to go through the floor
-Nitrous Outlet 45* bottle valve
-NX #10 nitrous bottle with said valve, NOS nitrous pressure gauge and blowdown safety cap (for filling)
-255lph Walbro fuel pump
-AN fuel pressure port (in case you want to hook up a temporary or permanent fuel pressure gauge).
-MSD Digital-6
-NX Window switch (3,000 and 6,000 rpm pills included)
-Fuel Pressure Safety switch
-Complete lines (nitrous feed, fuel, etc.)
-Various fittings (that stuff really adds up $$$)
-Brand new set of NGK #7 plugs (gasket seat)
-WOT/micro switch
-All of the wiring (relays, inline fuses, etc.)
-Switches (arming/purge)

Just gauging interest here. I don't really have good pics, but can take specifics for people who are interested.



Price is at $1,000 firm plus shipping. Pm me if you are interested, thanks!