ALL ITEMS $10 OR LESS. ANYTHING LISTED AS $FREE PAY SHIPPING ONLY WITH PURCHASE OF $10 PART OR TWO $5 PARTS.

Guys, my garage is basically full due to having too many projects going on and hoarding too many parts. I've got to get rid of stuff. I'm going to slash prices hoping to get SOMETHING out of these parts. If I have anything in 60 days, it's all going to the scrapper.

ALL PRICES NEED SHIPPING ADDED!

MULTIPLE ITEMS ARE PRICED PER EACH!

BOLTS NOT INCLUDED!

F-body oil pressure sender - $10
OBD2 Reluctor ring - $10
Stock oil pumps - $5
(2) stock crankshafts that both need turned - mileage unknown - $10
(2) sets of stock bore pistons - one with 75k, one with 175k - $10
Water pump w/ ECT sensor - $10
Bad stock head (some valvetrain parts?) - $5
Full valvetrain set (valves, retainers, locks, rockers, studs, etc.) - $10
TPS throttle position sensor - $5
IAC solenoid - $10
(2) kinda banged up oil pans - $10
Set of lifters (if I can find retainer clips) - $10
Water Pump Temp Sensor - $5
Head Temp Sensor - $5
Crank Balancer - $5
Windage Tray - $Free
Camaro A/C Hard Lines - $5
EVAP Solenoid - $Free
'94 Impala SS Cam - $5
Rear Main Seal Holder Plate - $5
AIR Bracket and Pump - $5
AIR Hard Piping That Goes Under Motor - $Free
Oil Pan Rails - $Free
Oil Pan Bolts - $5
Opti Vent Tubing - $10 (I might be out of these)
EGR Solenoid - $Free
OBD2 Crank Position Sensor - $5
PCV Tube (needs new rubber hose) - $Free
Oil Pump Driveshaft - $Free
MAP Sensor (no grommet) - $5
4L60E Flexplate - $5
Oil Pressure Sensor Elbow - $5
B-Body Oil Pressure Sensor - $Free
Stock Timing Set - $5
Stock Hardened Pushrods - $5
Oil Filler Tube - $10

Ask me about bolts for longblock parts, I may have them (oil pan, timing cover, opti, motor mounts, TB, etc.)

SOLD
Water pump gear drive
Lifters & dog bones
Cam retainer w/ bolts
Rockers
Set of pushrods
OBDI F-body balancer hub
Rear main seal holder
Valve covers
Windage tray
Timing set
Throttle body w/ sensors
AIR pump w/ bracket
EGR diaphragm, solenoid, tube
EVAP solenoid
MAP sensor
IAT sensor
IAC solenoid
Opti vent tubing
Good stock head w/ valvesprings only
Intake w/ MAP sensor, NO fuel rails
(2) power steering pumps
B-body OBD2 hub for Balancer
'93 22# Injectors
'94 Timing Cover
Valve Covers
T56 Slave Cylinder
Oil Filter Adapter for Cooling Lines
B-Body Offset Oil Filter Adapter w/ Oil Line Port
Tensioner Pulley
Tensioner Pulley
Pair of OBD2 Knock Sensors
Oil Dipstick w/ Tube
Camaro accessory bracket
Rear Main Seal Plate
(2) OBD1 PCM's
F-body starter

Recycled:
Frame Mounts
Motor Mounts

 

whats wrong with the "bad head" aluminum???

 

Sent PM.

 

Sent PM

 

Can you PM me about the injectors? I have some questions. Interested

 

Send me a picture of the hard a/c lines please and how much for shipping to 38017?

 

Still have starter? How much shipped to 21921? Thanks

 

How much for the oil dipstick shipped to 76179?

 

What year PCM if its a 94 lmk or will it work with a 94 m6.

 

Are the A/C hardlines all the lines? I mainly need the line that goes from the condenser to the accumulator, so if that's included I'll take it.

Let me know a shipped price to 38852, and also throw in the PCV tube too please?

 

Do you have heater core hoses?

Also fuse panels (inside care and under hood)

 

I have a 97 LT1 383 stroker. will the crank balancer work on mine? if so can you give me a price with shipping to 08093

 

Shipping quote for the crank to Barboursville, WV 25504.

 

Thanks. it should look like this

 

Do you have exhaust for sale?