Gauging interest in selling my race trailer
Thread Starter
Registered User
Joined: Oct 1999
Posts: 3,531
From: Battle Creek, MI
Gauging interest in selling my race trailer
heavy duty car/equipment hauler. Better setup than anything else you will find in the price range.
8' wide, 20' long. Beavertail in the back with fold down ramps. Decking is 2x material. (2x10 and 2x12). New lights, side markers, wiring, etc. Dual axles with mobile home wheels/tires. Electric brakes too. 8500lb capacity.
There is a wooden cabinet full width on the front with 2 locking doors. Aluminum tool box is recessed into the top. The cabinet has an interior light, and stores the battery and winch, as well as switches for power to the lights and power head jack. Outside the cabinet is power take off points for jump starting, running the winch, or any other 12v accessories. There is a master on/off switch too.
There are two adjustable lights that illuminate the loading area and your vehicle. there is a trailer ball up by the cabinet on the floor of the trailer. The winch mounting plate slips over the ball and that way can be stored out of the weather when not in use.
Tongue uses 2 5/16 ball, and has a power head hi torque jack powered by the on board 12v battery. Basically you push a button and it raises or lowers the tongue for you. No more cranking the handle. It also has lights on it so you can see to do all your hookups in the dark.
Winch is not a big one, but pulls the race car up fine. It's a 6000lb capacity rating, but that's rolling on flat ground. It's not very big, but does the job. Has a remote lead, and a crank handle backup in case of battery failure.
I'd like to get $1500 for it, but that's only going to be if the race car sells first. Anyone want to call dibs or have some interest?
8' wide, 20' long. Beavertail in the back with fold down ramps. Decking is 2x material. (2x10 and 2x12). New lights, side markers, wiring, etc. Dual axles with mobile home wheels/tires. Electric brakes too. 8500lb capacity.
There is a wooden cabinet full width on the front with 2 locking doors. Aluminum tool box is recessed into the top. The cabinet has an interior light, and stores the battery and winch, as well as switches for power to the lights and power head jack. Outside the cabinet is power take off points for jump starting, running the winch, or any other 12v accessories. There is a master on/off switch too.
There are two adjustable lights that illuminate the loading area and your vehicle. there is a trailer ball up by the cabinet on the floor of the trailer. The winch mounting plate slips over the ball and that way can be stored out of the weather when not in use.
Tongue uses 2 5/16 ball, and has a power head hi torque jack powered by the on board 12v battery. Basically you push a button and it raises or lowers the tongue for you. No more cranking the handle. It also has lights on it so you can see to do all your hookups in the dark.
Winch is not a big one, but pulls the race car up fine. It's a 6000lb capacity rating, but that's rolling on flat ground. It's not very big, but does the job. Has a remote lead, and a crank handle backup in case of battery failure.
I'd like to get $1500 for it, but that's only going to be if the race car sells first. Anyone want to call dibs or have some interest?
Thread Starter
Registered User
Joined: Oct 1999
Posts: 3,531
From: Battle Creek, MI
Thread
Thread Starter
Forum
Replies
Last Post
Moshbmx1
Parts For Sale
1
Jan 20, 2015 03:27 PM