Baer Track calipers. These bad boys provide some serious stopping power. When I bought them, Baer told me that the next step up brakes would garuntee to stop a 3500 lb vehicle from 180 MPH to 80 MPH in under 3 seconds!

I have been able to outstop another F-body with Willwood 6 piston brakes with my Baer Track system. In fact it wasn't even close. We did a 100 MPH side by side and jumped on the brakes until complete stop. He ended up a good 75 feet or so in front of me. We tried some higher speed slow downs as well, and his 6 piston setup was starting to catch some serious brake fade while mine just kept smiling for more.

I can jump on my Baer track system at speeds well over 140 MPH and it will literally throw you forward until you can feel the seat belt digging into your shoulder with almost no fade whatsoever!

If you are like me, and can't stand the brake fade and the weak stopping power of the factory brakes, and you have modified your car to the point where it can attain triple digits quickly, then you know that having adequate braking power is paramount (especially at high speeds).

What all comes with the Baer Track calipers? I will sell the calipers, along with the mounting hardware on my 95 Camaro. My cryogenically treated cross drilled and slotted rotors are showing signs of wear (some stress cracks). If you want them, I will include them also. I also have almost new Hawk HP Plus pads that will be included. Those not familiar with them, they are the most agressive stopping pad Hawk offers. Speaking of pads, the Track system is also nice because they take the same size pads that are on a 95 Mustang Cobra, so when it comes time to replace them, they are not nearly as expensive as some of the other aftermarket brake systems on the market.

I paid $1500 for my Bear track kit with pads. I am considering selling the calipers, the pads, the mounting hardware, and will throw in the rotors for $750. Keep in mind I am gauging interest here. If people are interested in them, hit me up via PM.

NOTE:
You will need AT LEAST 17 inch wheels to run these. Some 17 inch wheels will not be large enough given the size of these Calipers. GM OEM 17" wheels have proven to work fine with little, but enough clearance. Some aftermarket 17's will be too small. If you have any type of 18 inch wheel, you will be fine.

 

BTW, please don't low ball me. The performance level of LS1 brakes are no where near the level of these Baer brakes. So, if you are thinking they should cost the same, you are wrong. You cannot buy brakes that can stop you like these for that kind of money. These are for someone who needs/wants this level of stopping power, and knows that at $750, they are getting a very good deal.

 

What is the rotor size?

 

13.1" by .81"