Scat 9000 crank for lt1. 3.75 stroke int balance.

7-Scat I-beam rods with 3/8 rod bolts. Brushed

7- .020 SRP forged pistons floating pins

Comp cams 306 camshaft

all parts had about 2000 miles on them.

Will sell as a kit or seperate. All parts are in good used condition.

MAKE OFFER will ship from 75147.Texas WILL TRADE FOR??? Let me know what you have.

My # is 903-288-0079 Tommy

 

bump

 

where are u located in tx?

 

Is it a 4340 crank or 5140 ????

 

Yes i am about 60 miles s/e of Dallas. Mabank,TX

 

It is a scat 9000 crank. i think it is rated for 550hp.

 

is this for a 95 Z28? i need a crank immediatly. is it the stock one or a new one or used one or what? PM im very interested.

 

would this happen to be the part number for the crank? 9-350-3750-5700L

what length rod were you using with that setup? will the counterweights clear a 5.7" rod? also how were clearances with the cam, were you using a small base circle cam?

 

I used this crank with a 6'' rod. It cleared the cam fine. I dont know if it will work with a 5.7 rod or not.

 

I Have Pics That I Can E-mail If Any1 Is Interested. Just Give Me Your E-mail.