FS:Pro-Built 4L60E + Edge Converter. Will also sell A4 swap kit.
Thread Starter
Registered User
Joined: Jul 2001
Posts: 1,887
From: Kingsport, TN
FS:Pro-Built 4L60E + Edge Converter. Will also sell A4 swap kit.
This tranny and converter have approximately 3k miles on them. Only have had one bottle through them and 7 track passes. Performed flawlessly but I'm stepping up to a TH400 with a brake.
The tranny was built by Pro-Built and all the specs are here.
http://www.700r4l60e.com/store/custo...&cat=18&page=1
Cost $1950 brand new. Will handle 650 hp.
The converter is a 9.5" unit rated at about 3400 stall behind my heads/cam 355. Held 630+ rwtq locked up on the dyno. Has antiballoon plates and a high carbon lockup clutch. Works perfectly. This converter would cost you $675 brand new.
Only used TCI racing fluid in this setup and just pulled the tranny and the fluid looked brand new.
Asking $1350 and will not ship but I will drive a reasonable distance. If you are swapping to an A4 and needs parts then I can provide those at extra cost.
Can get pics upon request.
EMAIL ME AT loadre@hotmail.com FOR QUICKEST RESPONSE.
The tranny was built by Pro-Built and all the specs are here.
http://www.700r4l60e.com/store/custo...&cat=18&page=1
Cost $1950 brand new. Will handle 650 hp.
The converter is a 9.5" unit rated at about 3400 stall behind my heads/cam 355. Held 630+ rwtq locked up on the dyno. Has antiballoon plates and a high carbon lockup clutch. Works perfectly. This converter would cost you $675 brand new.
Only used TCI racing fluid in this setup and just pulled the tranny and the fluid looked brand new.
Asking $1350 and will not ship but I will drive a reasonable distance. If you are swapping to an A4 and needs parts then I can provide those at extra cost.
Can get pics upon request.
EMAIL ME AT loadre@hotmail.com FOR QUICKEST RESPONSE.
Registered User
Joined: Feb 2004
Posts: 1,010
From: North Iowa
Re: FS:Pro-Built 4L60E + Edge Converter. Will also sell A4 swap kit.
$1350 for the trans and converter?
why are you selling?
edit: guess i should learn how to read huh....lol.
can i get some pics to gundamscythe@hotmail.com??
Thanks
why are you selling?
edit: guess i should learn how to read huh....lol.
can i get some pics to gundamscythe@hotmail.com??
Thanks
Last edited by blahster; Aug 29, 2006 at 05:10 AM.
Thread Starter
Registered User
Joined: Jul 2001
Posts: 1,887
From: Kingsport, TN
Re: FS:Pro-Built 4L60E + Edge Converter. Will also sell A4 swap kit.
T56 FTL. 
Sorry guys I didn't get around to taking pictures tonight. Wound up having issues with the g/f and tore down the bottom end of the motor. Will have some up by suppertime tomorrow.
Sorry guys I didn't get around to taking pictures tonight. Wound up having issues with the g/f and tore down the bottom end of the motor. Will have some up by suppertime tomorrow.
Thread Starter
Registered User
Joined: Jul 2001
Posts: 1,887
From: Kingsport, TN
Re: FS:Pro-Built 4L60E + Edge Converter. Will also sell A4 swap kit.
Those are freshly yanked from the car without any kind of cleaning it up at all. Click on pics for larger version.
The trans also has a built in drain plug for the stock pan.
Last edited by Loadre; Aug 30, 2006 at 01:49 PM.
Thread Starter
Registered User
Joined: Jul 2001
Posts: 1,887
From: Kingsport, TN
Re: FS:Pro-Built 4L60E + Edge Converter. Will also sell A4 swap kit.
$400 shipped for the converter dependong on where you live. A new one built like this would cost you about $700. Get it now while you can cause I've got someone interested in the converter and the trans but haven't seen any money yet.
Brian
Brian
Thread
Thread Starter
Forum
Replies
Last Post
Moshbmx1
Parts For Sale
1
Jan 20, 2015 03:27 PM
