texasTA

I am selling a few parts from my project that I am just deciding not to use.

First brand new LT4 intake manifold. This manifold was fully ported by Jordon Musser. he also opened the front of the manifold to accept a monoblade throttle body. New manifold cost 250.00 porting cost 225.00 (475.00) I need 400 plus shipping

Second, used 58mm BBK throttle body. Has around 10000 miles on the unit. Has a black "BBK" throttle body plate on it. No problem with this and it comes with a brand new gasket. Brand new was ~300. I need 200 plus shipping.

Third, LS1 CORVETTE fuel rail covers (FRCs). Were slightly cut to fit on the later LS1 models, but also still fit the early years. I need 35.00 for them plus shipping.

Lastly, Baer Track Kit. Used has around 9000 miles on them. These are the Baer kit that came on the 1996 GrandSport Corvettes. They come with the upgraded 2-piece Baer rotors. 2 piston Grand Sport Calipers with absolute brand new pads (haven't even been installed yet). Also comes with the caliper brackets (which bolt to the spindles), and freshly painted gloss black modified 4th gen spindles. This kit helps braking tremendously. I am building more of a drag car, and want to go with the Strange Drag Race brake kit instead of this all-around setup. These wer on Saladbar's (moderator on here) 97 Z28 for 8000 miles and on Jordon Musser's car before that. I just paid 600.00 to Shawn for them. Even though I spent the additional 118.00 on the brake pads, I just need 600.00 plus shipping.

Thanks
Matt

Schurters LT1

Is the intake welded up buy the injectors? and for what heads were the intake runner ported to?

thx

roadtrip120

Pm sent on 58mm bbk

texasTA

No, the intake was never cut/welded. The front was machined to accept the monoblade and the intake runners were cleaned up, smoothed over and ported. Jordon assured me that this intake would flow as well as possible without cutting it open and welding it back together. The intake runners were ported for a set of fully ported LT4 heads which flowed 293 intake and 196 exhaust.
Not really sure what you mean by welded up by the injectors?

texasTA

PM back at you on the T.B. Everything sounds real good.

RealQuick

pm'd you about the brakes...

texasTA

PM sent back to you. Pics should go out tomorrow evening.


BBK T.B. appears to be sold to roadtrip120. Payment pending.

Everything else still available.

texasTA

Throttle Body sold.
Baer Brakes sold.

Manifold still available. I can do 400 shipped on it.

Fuel Rail Covers (FRCs) LS1 Corvette = Still available but pics are being sent to Green Goblin, as he sound interested.

Brand New never used A/C delete pulley = 40.00 plus shipping

BBK underdrive pulley and belt = 25.00 plus shipping

Factory LT1 oil cooler = 20.00 plus shipping

Stock dark grey (graphite) carpet, already cut for a 6 point cage = 50.00 plus shipping

Thanks
Matt