I have decided to part out my drag car that I was building. I have many parts for sale, and woudl like anyone interested to email me for pics or business. If the roller doesn't sale, it will be parted also.

ROLLER:
1994 black Trans Am = All body panels minus the hood. Great t-tops. Tall T/A wing. BMR tubular K-member, BMR upper A-arms, BMR adjustable lower A-arms, brand new steering rack, brand new upper ball joints, brand new outer tie rods, Hal 12-way adjustable front/rear shocks, stock 10-bolt, complete LT1 wiring harness, drivers cloth seat, BMR subframe connectors. I would like to get 3000 O.B.O. If this doesn't sell fairly quickly, then I will part out all the body panels/suspension parts.

Performance Parts:
BMR STB (for v6/LT1SS cars, but fit fine on my 1994 Trans Am) = 80.00

Fikse FM5s = 17x9.5 and 17x11 Black technipolished with polished lips. 275-40-zr17 Kumhos and 335-35-zr17 Dunlop Sport 8000 Both tires have plenty of treadlife, there are like 3 nicks in three of the wheels, nothing bad. 3000.00 OBO

2 3-foot sections of Rollbar padding = 10.00

T/A center section (says trans am on it in red) = 25.00

Brand new LT1/LT4 Water pump = Lifetime warranty through O-Reilleys = 75.00

Accessory bracket for LT1 cars = 15.00

4th Gen Graphite Dash with passenger side air-bag = 75.00

Aftermarket fuel system = LT1 tank with a 90 degree L fitting going into 5/8 steel braided lines into a Aeromotive fuel filter into two Walbro inline pumps then continues at 5/8 into a Aeromotive Y-fittingwhich hook up to the back of the LT1 fuel rails. Everything is quick-disconnect Aeroquip fittings and this fuel system is designed to support 1200rwhp = I spent 1600 will let go for 500.00 OBO

1 front wheel bearing hub (replacements are 130.00) = 20.00

LT1 Brake Booster = 20.00

LT1 Master Cylinder = 20.00

Stock 4th gen Torque arm = 10.00

Full interior = Graphite carpet, all plastic interior pieces, headliner, sunvisors = 100.00 obo

Grapite Door Panels = 85.00

Power Steering pump/pulley/resevoir = 40.00

Comp Cams Pro Mag 7/16 1.6 roller rockers with Poly-locks NSA = 225.00

ARP LT1/LT4 head studs = 157 new sell for 130.00

ARP 7/16 Rocker arm Studs = Brand new = 62.99 new sell for 50.00

ARP assembly lube and thread sealer = 15.00

Corbeau a4s with 4th gen sliders = these are black cloth and the wide version (needed if you are over a 34' waist) = Brand new was 400.00 per seat and 80.00 per track = will sale for 925.00

Stock LT1 oil cooler = 20.00

Engine Gasket set (head, manifold, intake manifold, front cover, rear main seal, EGR, AIR, throttle body, crank seal, distributor seal, waterpump) = new was 200.00 sale for 155.00

Custom fiberglass tweeter pods = these mount up on the triangles of the door behind the side mirrors. They fit most tweeters and give a real good sound stage because they point directly at your ears = 50.00

383 solid roller LT1 motor = This motor should make around 475rwhp. has a custom solid roller Cam Motions camshaft, Cloyes double-roller timing chain, B&M flexplate, ATI Super dampner, Callies 3.75 Dragonslayer fully forged crankshaft, Lunati 5.85 Pro Mod Rods, JE flat top forged nitrous pistons, Clevite H series main and rod bearings, Callies 4-bolt billet splayed main caps, ARP main studs and ARP rod bolts, Brand new freeze plugs and cam bearings. The block was hot tanked, bored and honed with plate, decked block, line bore, line hone, clearance for the stroker, rotating assembly is internally balanced, pistons and rods were honed, and everything is assembled. I have 1220 in machine work, a 800 crank, 630 rods, 500 pistons, 80 main studs, 19 cam bearings, 11 freeze plugs, 65.00 flexplate, 80.00 timing set, 400.00 super dampner, 110 main bearings, 110 rod bearings, 200 main caps, 400.00 custom ground cam.
So that is 4625 dollars in this shortblock. No expense was spared. I will let it go for 4400 OBO This is a great street/strip motor that is going to go very fast in the right car. I have all receipts on this motor from parts to machine work.


I will entertain all offers. I need this stuff sold because I am buying a house and a SUV. I am just getting out of the speed game. I will have pics of EVERYTHING this weekend. Also if someone wanted to come and pay a discounted price (~20%) for everything that would be great. All things total = 20,155 Will let EVERYTHING go for 16,900 This car should be capable of ,with the 350 direct port shot it was setup for, to run 9s in the 1/4

 

Keep posted if you're gonna part your roller.

Interested in front upper/lower control arms.

 

I want the oil pan and the push rod length gauge.

Send me pics and i'll pay pal you.

I would also like to know what it will cost to ship the roll bar to 85224 a business

I would also like pics of the roll bar and fuel system. Did you have fuel rails made to work with this system? I didn't see them mentioned

Thanks
Tom

 

Whew!!! That's some list. Can you send me pics of the Subthump sthealthbox to rp750@sbcglobal.net. Also, I'm looking for a drivers side a pillar for a ttop car in dark grey/graphite. If the push Rod guage falls thru I'll take that.
Thanks, Randy

 

Your first in line. It is all brand spanking new.

 

Anyone who wants pics, please just mention what pics you want and where to send them to (email address). I will get pics this weekend of everything.

 

If he doesn't take the pan above, I want it.

Dave

 

pics of rear seat deletes? would you sell only one of the AC lines (accumulator to evaporator) and the pigtail connector to the compressor?

m21muncie4 (at) yahoo (dot) com

 

would like pics of the rear seat delete sent to . thecalifornian87@yahoo.com thanks patrick

 

I'll take the modified cover and rag joint eliminator.

modified front cover for LT1/LT4 engines = Has the waterpump hole welded shut and has been clearenced to accept a double-roller timing chain. Also has brand new seals = 30.00

I'll take the gasket set too if the head gaskets are equivalent to 1074's.

You can contact me here at this address john.silas@ramstein.af.mil

Thanks!

 

Interested in the hood and airbox......how would you ship? Sent you a PM.

 

Matt. I'll take the alternator and maybe the 12 bolt. Bill

 

I'll also take the lugnuts. Bill

 

I'll get pics for everyone this weekend.

Bill, I believe the 12-bolt is spoken for (little brother), I will call you this weekend on Sunday. You know TX/OU is this weekend and I am hoping we can celebrate this year a little longer than the end of the 4th quarter

Everyone else, please just keep letting me know what you want pics of and where to send them.

 

Matt, I bought your baer brakes last month from you. I got cash in hand for the fuel system. Ready to buy...I can paypal ASAP.