FS: Mallory 685, Stk WP, Accel Coil, Custom Floor Mats
Thread Starter
Registered User
Joined: Jul 2002
Posts: 1,193
From: San Diego, CA
FS: Mallory 685, Stk WP, Accel Coil, Custom Floor Mats
Mallory 685 + MSD Harness - $175 shipped
I have a like new Mallory 685 ignition box. It comes with all connectors and the install book/directions. Was on the car for about 3K miles or 3 years. I pulled it off to switch to an LTCC setup. Also includes the MSD harness to make this truely plug and play with your stock coil and wiring. I will include the wiring that was with my setup to make your installation easier. Simply match the colors and give the box 12v and ground and you will be up and running. Box has adjustable limiters, a window switch, N20 retard, tach signal output and a tach test making it the perfect nitrous controler and ignition box.
Stock GM LT1 Water Pump - $25 + shipping and 3% paypal
This is an almost new GM lt1 waterpump. I pulled it off because I just installed a CSR waterpump and new housing. WP has about 7-8,000 miles on it (maybe). Probably closer to 5,000 but my speedo was way off for the last year it was regularly driven. Works perfect, no issues at all. Perfect bearings and kept my car at 180 all the time. (I'll take pictures if you want one)
Accell LT1 Coil - $10 plus shipping and paypal
Pulled the coil off because I swaped to the LTCC. No use for it now. It works fine and powered my car great. Maybe a little dirty but only 5-8K miles (same reason as the waterpump above).
Custom 00-02 Ebony Colored Z28 Embroidered Floor Mats - SOLD
These are floormats from www.f-bodycarpet.com. They run $150 brand new and these have never been used. Only in the car for the pictures I can send you. They are 1500 series Ebony carpet that is thick enough to stand a quarter in. Embroidered with Z28 and black letters. Includes front and back extra large mats. They are show quality and similar to a Lloyds mat. Far superior quality to any SLP or other general mat. Been sitting in a box for years. I paid a bunch, but my car only races now so I have no use. I have lots of pictures of these mats.
Contact me in this thread, via PM or at snvent(at)gmail.com. I have sold many items on this board and have all positive feedback.
I have a like new Mallory 685 ignition box. It comes with all connectors and the install book/directions. Was on the car for about 3K miles or 3 years. I pulled it off to switch to an LTCC setup. Also includes the MSD harness to make this truely plug and play with your stock coil and wiring. I will include the wiring that was with my setup to make your installation easier. Simply match the colors and give the box 12v and ground and you will be up and running. Box has adjustable limiters, a window switch, N20 retard, tach signal output and a tach test making it the perfect nitrous controler and ignition box.
Stock GM LT1 Water Pump - $25 + shipping and 3% paypal
This is an almost new GM lt1 waterpump. I pulled it off because I just installed a CSR waterpump and new housing. WP has about 7-8,000 miles on it (maybe). Probably closer to 5,000 but my speedo was way off for the last year it was regularly driven. Works perfect, no issues at all. Perfect bearings and kept my car at 180 all the time. (I'll take pictures if you want one)
Accell LT1 Coil - $10 plus shipping and paypal
Pulled the coil off because I swaped to the LTCC. No use for it now. It works fine and powered my car great. Maybe a little dirty but only 5-8K miles (same reason as the waterpump above).
Custom 00-02 Ebony Colored Z28 Embroidered Floor Mats - SOLD
These are floormats from www.f-bodycarpet.com. They run $150 brand new and these have never been used. Only in the car for the pictures I can send you. They are 1500 series Ebony carpet that is thick enough to stand a quarter in. Embroidered with Z28 and black letters. Includes front and back extra large mats. They are show quality and similar to a Lloyds mat. Far superior quality to any SLP or other general mat. Been sitting in a box for years. I paid a bunch, but my car only races now so I have no use. I have lots of pictures of these mats.
Contact me in this thread, via PM or at snvent(at)gmail.com. I have sold many items on this board and have all positive feedback.
Last edited by tireburnin; Dec 3, 2007 at 08:53 AM.
Thread Starter
Registered User
Joined: Jul 2002
Posts: 1,193
From: San Diego, CA
It works fine. I removed it thinking it was broken and that an LTCC would fix my problem. Turned out I had a bad connection going to my shift light/nitrous switches. Stupid mistake I should have just tried fixing before making the swap.
The box works fine and I have an LTCC now, so someone else can use it.
The box works fine and I have an LTCC now, so someone else can use it.
Thread
Thread Starter
Forum
Replies
Last Post
PFYC
Supporting Vendor Group Purchases and Sales
0
May 8, 2015 11:30 AM
PFYC
Supporting Vendor Group Purchases and Sales
0
Mar 13, 2015 07:15 AM
Z284ever
Automotive News / Industry / Future Vehicle Discussion
53
Aug 7, 2002 11:06 PM