FS: LT4 Hotcam, lifters , spring kit, and timing set
Thread Starter
Registered User
Joined: Jan 2001
Posts: 261
From: Ft. Myers, Florida
FS: LT4 Hotcam, lifters , spring kit, and timing set
(SOLD) Want to let you know up front, these parts will be sold when motor comes apart on 1 Jan. Commit now and get a great deal.
LT4 hotcam kit minus rockers, Comp Cam roller lifters, and LT4 Extreme duty timing set. All parts have 8,000 miles on them and are in great shape, no problems at all. Removing due to a 396ci build up.
Parts cost $600 new
Want $100 to commit, and $180 When shipped. (SOLD)
Sold allot of parts on the board.
Car is not being driven now, (I'm on deployment overseas).
Post or e-mail me if interested.
Thanks
Brian(SOLD)
LT4 hotcam kit minus rockers, Comp Cam roller lifters, and LT4 Extreme duty timing set. All parts have 8,000 miles on them and are in great shape, no problems at all. Removing due to a 396ci build up.
Parts cost $600 new
Want $100 to commit, and $180 When shipped. (SOLD)
Sold allot of parts on the board.
Car is not being driven now, (I'm on deployment overseas).
Post or e-mail me if interested.
Thanks
Brian(SOLD)
Last edited by Lt1tko5o; Nov 19, 2003 at 06:46 AM.
Registered User
Joined: Apr 2003
Posts: 179
Thread Starter
Registered User
Joined: Jan 2001
Posts: 261
From: Ft. Myers, Florida
Will also consider partial or even trades for my valvetrain setup listed above:
Need the Following
58mm Throttle body
30-36lb SVO injectors
Underdrive pully and belt
"NEW" high volume oil pump for LT1
Corvette plastic valve cover set
Aftermarket torque arm
Aluminum driveshaft
Tubular K-Member
Upper & Lower 1LE or tubular front A-arms
SS rear spoiler
275-40-17 Nitto's (good shape)
Digital 6 MSD Ignition
LT1 Gasket set (full)
New 3.73 gears and Install kit (3 series)
Aluminum rear end cover
"R" Lifters (low miles)
Rev Kit
Vented Opti spark (new or Very little miles)
High Flow MAF
Vilanti or Yank torque convertor 2600-2800 stall ( I would owe you money)
Brian
Need the Following
58mm Throttle body
30-36lb SVO injectors
Underdrive pully and belt
"NEW" high volume oil pump for LT1
Corvette plastic valve cover set
Aftermarket torque arm
Aluminum driveshaft
Tubular K-Member
Upper & Lower 1LE or tubular front A-arms
SS rear spoiler
275-40-17 Nitto's (good shape)
Digital 6 MSD Ignition
LT1 Gasket set (full)
New 3.73 gears and Install kit (3 series)
Aluminum rear end cover
"R" Lifters (low miles)
Rev Kit
Vented Opti spark (new or Very little miles)
High Flow MAF
Vilanti or Yank torque convertor 2600-2800 stall ( I would owe you money)
Brian
