FS: LT1 T56 Swap, AS&M Headers, Pro Magnum Rockers, DMH Cutout and more!
Thread Starter
Registered User
Joined: Jul 2002
Posts: 1,193
From: San Diego, CA
FS: LT1 T56 Swap, AS&M Headers, Pro Magnum Rockers, DMH Cutout and more!
For Sale: LT1 T56 Swap, AS&M headers, 1.6 ProMag Rockers, DMH E-cutout, 94 LT1 heads, Newer Replacement Alternator, etc
PICTURES:
http://picasaweb.google.com/snvent/B...y=fvTeH6xynmg#
I will add more pictures and parts over the week. All prices are OBO and I accept Paypal or USPS money order. If you want to use paypal either pay by E-check (which limits fees to $5) or include 3% for the fees. Feel free to respond in this thread, by PM or email me at snvent(at)gmail.com
Complete LT1 T56 Swap - $1100 + Shipping SOLD
This is coming out of an 85K mile camaro. It includes most parts needed to make the swap including pedals, clutch, flywheel, pressure plate, master cylinder, T56, bell housing, crossmember, stock shifter, rubber boot, bolts, center console insert (minus the leather boot) and shift ball. The T56 shifts fine in all forward gears, but reverse pops out on occasion. It started just before I pulled it, but I never got around to rebuilding it. It could have been low on fluid or dirty, but I consider myself an honest seller and want to disclose it. Includes a Valero clutch (stock replacement) with about 10-15k miles on it. Transmission mount is a red Prothane mount in good condition. Pictures don't show the pedals, hydrolics or console insert but I will add them within the week. ***I've quoted shipping on this a bunch and it appears to be around $200 depending on your distance.
94-95 AS&M Coated Headers & Y-pipe - $265 + Shipping
***Add the bolton catalytic converter for $100 *** Cat is still available but the headers are SOLD
These 1 3/4 mid length headers are coming off a 94 LT1 and have all the emmisions hook ups and bolts to install them on your car. The headers are from Arizona Speed and Marine and cost $789 new. The headers are in good condition with light surface rust on some parts but overall good coating. Headers are about 20k miles old and fit/worked well before removal.
If you want a complete bolton smogable setup I will sell the modified cat for $100 extra. The cat has a 3 bolt flange welded on to perfectly match up to these headers. The core is in great condition.
1.6 Pro Magnum NSA Roller Rockers (3/8 Studs) - $165 + Shipping SOLD
These 16 rockers are for stock 3/8 studs and have about 15k miles on them. They are in good condition and include all poly locks and nuts. A few of the rockers have light maring/rubbing on the guide tips from an incorrect install but are functionally perfect. Rollers and bearings all feel great and the car was running well before removal.
3in Electric Cutout - $120 + Shipping
I believe this cutout is made by DMH, but I can't find markings for confirmation. It looks exactly like the DMH cutout I used to run on another car, but I'm not positive. Includes cutout, harness, switch and bolt caps. Tested it today and it works great.
Stock 94 LT1 Heads - $179 + Shipping SOLD
If you are looking for cores to send out for porting, these are for you. They are complete heads off an 85K mile 94 camaro with a casting number ending "374." These are the thick castings that make the best cores. Car was never over heated and ran great before spinning a cam bearing. Heads have some unknown aftermarket spring installed.
Stock Replacement Alternator - $25 + Shipping
This alternator was replaced shortly before tearing the car apart. The unit has about 5k miles on it and worked fine before removal.
More parts to come...
PICTURES:
http://picasaweb.google.com/snvent/B...y=fvTeH6xynmg#
I will add more pictures and parts over the week. All prices are OBO and I accept Paypal or USPS money order. If you want to use paypal either pay by E-check (which limits fees to $5) or include 3% for the fees. Feel free to respond in this thread, by PM or email me at snvent(at)gmail.com
Complete LT1 T56 Swap - $1100 + Shipping SOLD
This is coming out of an 85K mile camaro. It includes most parts needed to make the swap including pedals, clutch, flywheel, pressure plate, master cylinder, T56, bell housing, crossmember, stock shifter, rubber boot, bolts, center console insert (minus the leather boot) and shift ball. The T56 shifts fine in all forward gears, but reverse pops out on occasion. It started just before I pulled it, but I never got around to rebuilding it. It could have been low on fluid or dirty, but I consider myself an honest seller and want to disclose it. Includes a Valero clutch (stock replacement) with about 10-15k miles on it. Transmission mount is a red Prothane mount in good condition. Pictures don't show the pedals, hydrolics or console insert but I will add them within the week. ***I've quoted shipping on this a bunch and it appears to be around $200 depending on your distance.
94-95 AS&M Coated Headers & Y-pipe - $265 + Shipping
***Add the bolton catalytic converter for $100 *** Cat is still available but the headers are SOLD
These 1 3/4 mid length headers are coming off a 94 LT1 and have all the emmisions hook ups and bolts to install them on your car. The headers are from Arizona Speed and Marine and cost $789 new. The headers are in good condition with light surface rust on some parts but overall good coating. Headers are about 20k miles old and fit/worked well before removal.
If you want a complete bolton smogable setup I will sell the modified cat for $100 extra. The cat has a 3 bolt flange welded on to perfectly match up to these headers. The core is in great condition.
1.6 Pro Magnum NSA Roller Rockers (3/8 Studs) - $165 + Shipping SOLD
These 16 rockers are for stock 3/8 studs and have about 15k miles on them. They are in good condition and include all poly locks and nuts. A few of the rockers have light maring/rubbing on the guide tips from an incorrect install but are functionally perfect. Rollers and bearings all feel great and the car was running well before removal.
3in Electric Cutout - $120 + Shipping
I believe this cutout is made by DMH, but I can't find markings for confirmation. It looks exactly like the DMH cutout I used to run on another car, but I'm not positive. Includes cutout, harness, switch and bolt caps. Tested it today and it works great.
Stock 94 LT1 Heads - $179 + Shipping SOLD
If you are looking for cores to send out for porting, these are for you. They are complete heads off an 85K mile 94 camaro with a casting number ending "374." These are the thick castings that make the best cores. Car was never over heated and ran great before spinning a cam bearing. Heads have some unknown aftermarket spring installed.
Stock Replacement Alternator - $25 + Shipping
This alternator was replaced shortly before tearing the car apart. The unit has about 5k miles on it and worked fine before removal.
More parts to come...
Last edited by tireburnin; Sep 26, 2008 at 10:13 AM.
Thread Starter
Registered User
Joined: Jul 2002
Posts: 1,193
From: San Diego, CA
Thanks,
Sean
Thread Starter
Registered User
Joined: Jul 2002
Posts: 1,193
From: San Diego, CA
If you would like more pictures of a specific area, please feel free to ask.