FS LE2 heads, PAC 1518 springs, BRE cam
Thread Starter
Registered User
Joined: Mar 2002
Posts: 3,245
From: Ocala, Florida
FS LE2 heads, PAC 1518 springs, BRE cam
FS LE2 heads, 3000 miles on them. They need new guides and possibly a valve job, otherwise they are fine. They come with 918 springs, and I'll throw in a box brand new of fel-pro viton valve stem seals and brand new trickflow guideplates. They were only installed, never run. The heads will not come assembled since you will need to have them disassembled to put the new guides in anyway. The 918's have 4000 miles on them, but I would have the spring pressures checked before you run them, and they are sold as is. Heads are 374 castings. The heads have had the hole in the pushrod pinch fixed and sleeves installed in the 2 head bolt holes where he broke through them when he was porting them.
Flow #'s
.2 143/110
.3 199/141
.4 246/173
.5 274/188
.6 279/196
.650 282/200
$925 shipped with the 918's (if you sell your cores for $200 its like you are getting these heads for $725 + there is no 4 week wait). Sale Pending
http://s86.photobucket.com/albums/k106/spddmn24/Heads/
Brand new Pac 1518 springs, $200 shipped. - SOLD
BRE cam, 4000 miles on it, $200 shipped. SOLD
http://s86.photobucket.com/albums/k106/spddmn24/Cam/
Flow #'s
.2 143/110
.3 199/141
.4 246/173
.5 274/188
.6 279/196
.650 282/200
$925 shipped with the 918's (if you sell your cores for $200 its like you are getting these heads for $725 + there is no 4 week wait). Sale Pending
http://s86.photobucket.com/albums/k106/spddmn24/Heads/
Brand new Pac 1518 springs, $200 shipped. - SOLD
BRE cam, 4000 miles on it, $200 shipped. SOLD
http://s86.photobucket.com/albums/k106/spddmn24/Cam/
Last edited by speed_demon24; Sep 25, 2007 at 03:11 PM.
Thread Starter
Registered User
Joined: Mar 2002
Posts: 3,245
From: Ocala, Florida
Thread Starter
Registered User
Joined: Mar 2002
Posts: 3,245
From: Ocala, Florida
I also forgot to add I went 12.0 @118.3 with a high 1.9 60' with these heads in a full weight car and the BRE cam I have for sale.
Last edited by speed_demon24; Sep 15, 2007 at 09:50 PM.
Registered User
Joined: Feb 2003
Posts: 437
From: Cocoa, FL
Hey remember me...? Its been awhile since I talked to you.
so why did you end up taking off these heads? They're actually the heads I was planning on getting down the road... but I can't say that I have the money right now for them, especially if i was going to have to put more money into them.
being broke sucks... but good luck with the sale, its definately a good price for a good set of heads.
so why did you end up taking off these heads? They're actually the heads I was planning on getting down the road... but I can't say that I have the money right now for them, especially if i was going to have to put more money into them.
being broke sucks... but good luck with the sale, its definately a good price for a good set of heads.
Thread Starter
Registered User
Joined: Mar 2002
Posts: 3,245
From: Ocala, Florida
Hey remember me...? Its been awhile since I talked to you.
so why did you end up taking off these heads? They're actually the heads I was planning on getting down the road... but I can't say that I have the money right now for them, especially if i was going to have to put more money into them.
being broke sucks... but good luck with the sale, its definately a good price for a good set of heads.
so why did you end up taking off these heads? They're actually the heads I was planning on getting down the road... but I can't say that I have the money right now for them, especially if i was going to have to put more money into them.
being broke sucks... but good luck with the sale, its definately a good price for a good set of heads.
Thread Starter
Registered User
Joined: Mar 2002
Posts: 3,245
From: Ocala, Florida
If these don't sell over the weekend I'm going to fix the heads myself locally then put them back up for sale, so if anyone would be interested in the heads when they are fixed let me know.
Thread Starter
Registered User
Joined: Mar 2002
Posts: 3,245
From: Ocala, Florida
The cam is still for sale, and since no one is interested in heads that need machine work I am going to take them to get fixed and put on brand new pac 1218 springs then put them back up for sale when I get them back. If anyone is interested in them when I get them back and want me to hold them for you PM me and we can arrange something otherwise I will start a new thread then I get them back. I should have them back thursday-friday this week.
