Fuel Pump - A stock Gm fuel pump that has been used for under 1000 miles. I have been told that it can support up to 450hp. I replaced it in july so it is basicly brand new.
$100 + shipping.

LT4 Knock Module - This is the knock module that came in the 1996 corvette grandsport and was used to desensitize the knock sensor. It has under 1000miles aswell.
$20 + shipping.

Comp Cams Lifters - This is a set of Comp Cams Lifters for LT1 and LS1 motors. They are supposed to reduce the chance of lifter pump-up. The also have under 1000miles on them.
$100 + Shipping.

LT4 Hot Cam - This is the GM LT4 Hot Cam. With this cam on an otherwise stock car, I ran 13.4 @ 102mph. It is in great condition. The specs are as follows:
Duration @ 0.050: 228/218
Lift w/ 1.6 rockers: .525/.525
$100 + shipping.

Aeromotive Fuel Presure Regulator - This regulator is used to increase the fuel pressure to compensate for small injectors on a high horsepower motor and also when the fuel pressure is increased it helps atomize the fuel better.
$100 + shipping.

Stock Rear End - This is a stock 95 camaro rear end with 3.42 gears and a auburn posi. The rear end works great with no signs of wear or fatigue.
$150 + shipping or pick-up.

TCI Super Streetfighter - This is TCIs best converter they make for the 4L60E. It is a 10" converter with a 12" lock-up. The problem with 10" lock-up converters is that there isn't enough surface area to lock-up a high horsepower motor but with a 12" lock-up there is alot more surface area. The converter is a 3500 stall and has less than 1000miles.
$400 Shipped.

 

is the cam with the 1.6rr and springs. if so ill take for 100 +shipping. how many miles on cam and can i see picks.

 

No, its just the cam and it probably has about 5000miles but its a roller so there is no wear. If you want pics send me your e-mail.

 

where are you located?

 

where are you?

 

I'm interested in the lifters

 

Do you mean knock module, the thing that goes into the PCM?

 

might want the cam let you know in a week

 

pm sent

 

Dibs on the module!!!Ill take that knock module.. Please send payment instructions to me.. Thanks , Robb.

 

ttt

 

Do you have the part number for the lifters? Are they the OEM replacement style?

 

I sent pm on 26th, interested in the LT4 Hotcam, did not get reply. Still interested if not sold, let me know.

 

the lifters I have are part # 850-16. I heard that part #875-16 are the bad lifters because the clip that holds the plunger in always breaks.

 

You ran that time on a bone stock car with the hotcam or did you have any other mods? Please list, I am curious thanks.