FS: heads, hotcam, springs
Thread Starter
Registered User
Joined: Aug 2002
Posts: 202
From: DE
FS: heads, hotcam, springs
I am selling the old setup from my camaro. This includes the GM hotcam, springs, ported aluminum heads - basically stage I, with stock size valves. Cam and springs have less than 10k with heads being a used set off another car that I had ported
$600 for everything - ask about splitting up if interested....
I also have 2 extra felpro head gaskets: will sell both for $30
used 24lb injectors $30
used water pump $20
possible a used vented opti $40
all of the above are used except for the gaskets.
I have had zero problems with any of what is listed, but while my car is apart I am cleaning house...
$600 for everything - ask about splitting up if interested....
I also have 2 extra felpro head gaskets: will sell both for $30
used 24lb injectors $30
used water pump $20
possible a used vented opti $40
all of the above are used except for the gaskets.
I have had zero problems with any of what is listed, but while my car is apart I am cleaning house...
Thread Starter
Registered User
Joined: Aug 2002
Posts: 202
From: DE
I will split shipping if you like. I never had it dynoed or ran it at the track. I did however pull away from my buddies LS1 SS steadily, even after 70mph. That speaks well for the heads and the top end power of the cam. I did also have LT headers when I raced the LS1. I would have run a mid to high 12 sec 1/4 mile depending on traction and air temp....
Thread Starter
Registered User
Joined: Aug 2002
Posts: 202
From: DE
I have a set of Felpro head gaskets and a set of GM head gaskets. Let me know which of those you would like. The Felpros cost me $60 for the pair, but you can have them for $30 if you'd like them. The GM set you can have for $10. If you want, just let me have your email address and I'll keep in touch with you that way. Mine is LJonahjonah@aol.com
