When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I am selling a set of Forgeline 3 piece concave wheels. They are muscular 5 spoke wheels. They have a center bore of 70.3mm and bolt pattern is 5x120.65mm (5x4.75").
They came off my C6 Corvette Z06 but they can be used on 1,2,3,4 gen cars if you are looking for some more extra width in wheel and tire on your F body.
Front wheels are 19x10" +32 and rear wheels are 19x12.5" +57 Polished outer lip with a gray centre. These fully forged wheels are lightweight and strong. If you are not familiar with Forgeline wheels here is a link to their site describing the particular wheel (copy and paste to your browser):
They will be properly packaged in wheel boxes (4 of them) and shipped to you with tracking. Asking US$3900.00 shipped to lower 48 and Canada. Payment by Paypal friend/family or add 3% or bank wire. If you have TPMS on your car I can include a set of 1 year old Schrader EZ sensors (what I used on these wheels when they were on my Z06). These sensors are dual frequency so no issues with syncing to your car. PM me for info or text is better 416-919-1769.
Sensors are sold, wheels are still available. I'd like to sell them but I am not giving them away for next to nothing. If you have an offer in mind and is not a lowball offer I will consider it. Contact me and let's work something out.
While they are very good looking wheels, and have the correct bolt pattern and center bore, they really don't appear to fit on a 4th Gen. The backs calculate to a 9.0" backspace. That would require modifications to the lower control arm, and possibly a mini-tub. Fronts calculate to a 4.25 front space, putting them outside the fender edge.
I provided all the #'s related to the wheels (other than backspacing, I'm more used to offset measurement instead). As a buyer it would be up to him/her to ensure the wheels will fit their application on each gen of F body. Some owners may have Corvettes and these will fit no issue. These wheels would also be suited to someone modding their F body into a Pro Touring type of ride and would have no problem using these wheels since they will have the room for these in the wheelwells.
Reach out to me if you are unsure, I would be more than willing to help ensure a great transaction and fitment of these wheels to your car.
I get it. But your blanket statement that these will work on 1st, 2nd, 3rd, and 4th Gens is (unintentionally) misleading. Yes, bolt circle is fine, center bore is mostly OK (there are early 4th Gen F-Body’s the have a larger diameter rear axle hub). I've had this issue since you first posted, and feel it was time to bring this to the attention of the “uniformed” among us that have no idea of the concept of offset or backspace.
May be the reason they aren’t selling, but mostly it’s because this site is dying a slow death and nobody comes here any more.
Point taken, however it is not my intention to mislead anyone with my ad. There is the internet and I know that before I fork out that kind of money I would do my research and communicate with the seller before I hand over thousands of dollars for any item being sold online. The needed info is provided and if there is any doubt by any buyer reaching out doesn't cost money and any seller would be glad to help to ensure someone is getting what they are paying for...................that's all.
Having said all that, today a buyer came through and wheels are sold. All is well on both ends.
Feel free to delete this listing as item is now sold. Thank you everyone!!!!!!
