Email- bubblemailer@excite.com
paypal-bubblemailer@excite.com
location- Valparaiso, IN (about 45 min from CHICAGO)

DO NOT PM ME BECAUSE I WILL NOT GET IT

-all body panels off a black 95 trans am
-fenders
-hatch with glass
-front bumper cover
-t tops
-tail lights
-all stock seats charcoal cloth color great shape
-and anything else you can think of
-all in good shape and pick up only

-PERFORMANCE
-TBYRNE cold air kit (identical to moroso's) 80.00 shipped
-IRS MAF sensor- (identical to Granetelli) 100.00 shipped
-1.6 crower rockers with guideplates, hardened pushrods, arp bolts, comp cams lifters, complete set up all for 350.00 shipped
-msd wires for LT1- 40.00 shipped
-hal front 12 way adjustable shocks- 225.00 shipped
-hal rear 12 way adjustable shocks- 225.00 shipped
-BMR lower control arms- 75.00 shipped
-stock alternator, works perfect, low miles,-70.00 shipped
-cheetah shifter for turbo400 or 350 swap- 200.00 shipped
-lokar dipstick-35.00 shipped
-mickey thompson intertubes for slicks- 50.00 shipped
-full manual brake set up with line lock for LT1 car (came out of a 95 TA) - all for 300.00 shipped

383 all forged short block fresh rings and bearings
-cola crank
-I beam rods
-JE forged flat top pistons (pump gas set up)
-4 bolt splayed mains
-canton oil pan, pick up, etc
-pefect shape, fresh and ready to go

-2800.00

 

The BMR LCA's are what I am interested in...color? Boxed or tubular? More details on them.

-Dustin-

 

grey/silver tubular polyurethane bushings

 

sent you an email bro, put me first in line on the front HALs

 

I sent you an e-maill. Get back with me. Micheal

 

would u consider a partial trade for the 383? its a 383 lt1 right? let me know.extremely interested if you would do a trade plus cash transaction. i have an lt1 freshly rebuilt with only 10k miles on it. runs new. still under warranty on everything.


-Daniel

 

Sent you an email for the cai.

 

Do you have interior? I need the black trim for the interior hatch...

also if u have everything for the ttop conversion?

 

What about the driver side ground effect and the driver side quater panel

Brake

 

I do have the driver side ground effect and quarter panel, can you pick it up though, and whats your offer. All interior is gone, sorry. Im not looking for any trades unless you have a decent truck and I can give you cash

 

1.6 crower rockers with guideplates, hardened pushrods, arp bolts, comp cams lifters

What are the part numbers/descriptions on those?

 

the rockers are 1.6, what else do you need to know, Im not sure what the part numbers are

 

What size studs do the rockers use?
Brand pushrods?
arp bolt #(are these the rocker studs?)?
Lifter #(Example, the R lifters will work on my setup, the regulars wont)?

Need part numbers to know exactly what one is getting. All 1.6 rockers were not made equal.

 

Man bro, to be honest, Im not really sure, I know my engine builder bought a lot of the parts and I have no way to get a hold of him. If you live close, you can come check everything out and see if you want it

 

yea, i need some comp-r lifters too.