FS: 97 timing cover, Accel 30lb Injectors, Stock heads, Milled heads, WP, Lifters

Thread Tools
 
Search this Thread
 
Old Oct 6, 2011 | 04:18 PM
  #1  
tireburnin's Avatar
Thread Starter
Registered User
 
Joined: Jul 2002
Posts: 1,193
From: San Diego, CA
FS: 97 timing cover, Accel 30lb Injectors, Stock heads, Milled heads, WP, Lifters

FS: 97 timing cover, Accel 30lb Injectors, Stock heads, Milled heads,

All parts are from a 1997 Camaro Z28 that was used for road racing only for the past few years. The build spun a bearing and was pulled for an LS1 setup. Very low mileage on most parts. I will have more pictures soon (just ask if you don't see the one you want).

All prices are OBO. For shipping quotes PM me your zipcode and let me know if you have a business address for cheaper rates. I ship by Fedex.

TONS OF PICTURES: https://picasaweb.google.com/1087816...rs6obSuOr_nAE#



Accel 30lb/hr Fuel Injectors - $99 PLUS SHIPPING
Injectors have about 1k miles on them and they were working fine when removed.

97 LT1 Timing Cover (with cam sensor) - $55 PLUS SHIPPING SOLD
The cover doesn't have any issues, but you you may want to check the sensor seal when you install it on your engine. The sensor worked fine before the engine was pulled and parted out. **This is the cover you want to do an LS1 PCM conversion.

Stock LT1 Intake Manifold - $39 PLUS SHIPPING SOLD
This manifold is stock and in good condition. I can include fuel rails and a stock regulator for $10 extra if bought together..

LT1 Lifters (low miles) - $35 SHIPPED SOLD
The lifters have about 300 miles on them and are in great shape. They just need to be cleaned before use.

LT1 Fuel Rails and Stock Regulator - $15 PLUS SHIPPING
Stock without any issues.

Stock LT1 Heads with Comp Double Springs Good to .600 - $140 PLUS SHIPPING SOLD
These heads were pulled off one of my old cars that had a GM847 cam. The springs had about 5k miles on them and the heads are otherwise stock. These are ready to run and came of a 97 and are 374 castings.

LT1 Heads Milled to 54cc w/ Comp Double Springs - $140 PLUS SHIPPING
These heads were used on the 355 that is for sale here. They are milled for more compression and have springs that good until .600. I ran a GM846 cam with these heads. The ports and valves are stock other than a valve job. These are 374 castings off a 97 lt1.

PowerBond 80030 LT1 Harmonic Balancer (not SFI) - $25 PLUS SHIPPING SOLD
This balancer has about 300 miles on it and is not SFI approved but still a nice upgrade from the stock balancer. It is neutral balanced (like stock) and will bolt right up.

Stock LT1 Waterpump - $19 PLUS SHIPPING
The waterpump has about 5k miles and is not a GM part. Some of the ports are blocked off (oil cooler etc).

Last edited by tireburnin; Oct 28, 2011 at 08:19 AM.
Old Oct 6, 2011 | 08:59 PM
  #2  
jaben2's Avatar
Registered User
 
Joined: Oct 2011
Posts: 22
Re: FS: 97 timing cover, Accel 30lb Injectors, Stock heads, Milled heads, WP, Lifters

Pm on the stock heads, and intake with fuel rails and front cover
Thanks,
Old Oct 6, 2011 | 09:26 PM
  #3  
tireburnin's Avatar
Thread Starter
Registered User
 
Joined: Jul 2002
Posts: 1,193
From: San Diego, CA
Re: FS: 97 timing cover, Accel 30lb Injectors, Stock heads, Milled heads, WP, Lifters

PM Sent.

Thanks
Old Oct 6, 2011 | 09:31 PM
  #4  
vangill's Avatar
Registered User
 
Joined: Jan 2011
Posts: 284
Re: FS: 97 timing cover, Accel 30lb Injectors, Stock heads, Milled heads, WP, Lifters

when u say wp ports blocks off do they just have those hose caps on them? did that work ok?
Old Oct 7, 2011 | 11:01 AM
  #5  
tireburnin's Avatar
Thread Starter
Registered User
 
Joined: Jul 2002
Posts: 1,193
From: San Diego, CA
Re: FS: 97 timing cover, Accel 30lb Injectors, Stock heads, Milled heads, WP, Lifters

Those hose caps worked fine for the track purposes I used it for. There is also a block off plug in the top of the waterpump near the return/thermostat housing. I think I have another stock pump that doesn't have these plugs/caps too.
Old Oct 7, 2011 | 12:50 PM
  #6  
wamatam's Avatar
Registered User
 
Joined: Jul 2011
Posts: 27
Re: FS: 97 timing cover, Accel 30lb Injectors, Stock heads, Milled heads, WP, Lifters

pm sent get back to me with paypal info
Old Oct 11, 2011 | 08:47 AM
  #7  
tireburnin's Avatar
Thread Starter
Registered User
 
Joined: Jul 2002
Posts: 1,193
From: San Diego, CA
Re: FS: 97 timing cover, Accel 30lb Injectors, Stock heads, Milled heads, WP, Lifters

Updated for sold items
Old Oct 28, 2011 | 08:21 AM
  #8  
tireburnin's Avatar
Thread Starter
Registered User
 
Joined: Jul 2002
Posts: 1,193
From: San Diego, CA
Re: FS: 97 timing cover, Accel 30lb Injectors, Stock heads, Milled heads, WP, Lifters

Bump - updated for sold items
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
oldschool
Parts For Sale
16
Feb 9, 2016 09:21 PM
*Emilia*
Parts For Sale
9
May 13, 2015 09:05 AM
willismoons
Parts For Sale
14
Feb 14, 2015 08:42 PM
Queens94z28
Parts For Sale
3
Dec 20, 2014 09:11 PM
siguy
Parts For Sale
3
Nov 27, 2014 10:07 AM




All times are GMT -5. The time now is 05:30 AM.