FS: 95'z28 convertible

Thread Tools
 
Search this Thread
 
Old Jul 16, 2003 | 10:03 AM
  #1  
Geoff Chadwick's Avatar
Thread Starter
Registered User
 
Joined: Apr 2002
Posts: 2,154
From: All around
FS: 95'z28 convertible 6spd

Alright, here's the deal, short and sweet.
1995 Z28 Convertible (Bright Teal Metallic) with every factory option at order aside from leather (cd player, power seat, premium sound, abs, power galore, oil cooler, 245's from the factory). Everything works (but the passenger side window is a little slow). It's a 6-speed! It has the original window sticker, sales flyer, and has been treated well. Owned by a supervisor at the dealership till 30k, then sold to his girlfriend who owned it till 135k. I have owned it since. Car is rather clean, no holes or rips in the seats, only hole is a wear mark where the clutch heel goes. New floormats would fix that, which I will provide if a good offer is made.

Good:
New shocks,struts,water pump,optispark,filters,belt,plugs,wires,etc. within 10k. Brand New starter with a lifetime warranty. Winshield will be replaced before car is sold. No marks, no scratches, nothing.

Mods include:
MAC coated headers (on there for 300 miles) Corsa powerpulse (1000 miles or so). FF75 fog lamps.

218/230 114LSA Extreme Energy Cam, CC Type R lifters, Double Roller Timing Chain, Cmotorsports springs/pushrods etc, and GM Perf. 1.6rr... all within 1000 miles.

ECU has been done by PCMforless. Also has an electric water pump, SLP CAI, WELD IN Sub frames and a Strut Brace (Both by BMR) and a brand new top of the line battery with like 800cca.

I have a scanmaster installed into the gauge bezel (see firebird method) and it can come with the car or not. IF not, I have a mint gauge bezel to replace it, and a spare vent to install it that way if you want it (see typical pre 96 install) That's most of the mods...

The bad: She has 142,000 miles, and needs tires.

The REALLY BAD: Motor is running, not siezed, but clacking like a bad rod bearing or collapsed lifter, or something else. Compression was tested after valvetrain install but before knocking and was dead on. Leakdown test also done by the dealership, and was also dead on. Considering the fact that the clacking is intermittent, it is just starting, and probably not serious. You can easily make the noise go away by changing the engine rpm and load... So it may just need new lifters or a bearing job, or a full blown rebuild, or who knows. Your call.

If I sell the car, the buyer can choose the mods they like. All the mods are installed, but can be removed. If headers arent wanted, I can put the stock manifolds/y-pipe back with the car. Waterpump is electric, and stays that way because of double roller setup.

FOR SALE (ALL PRICES NEGOTIABLE)

Car itself with Strut brace and subframes, title (clear in hand) original window sticker (framed) and sales flyer (in hand and clean as new)BEST OFFER BY SEPT 6th TAKES IT, I'll take anything reasonable Highest offer so far is $4000
Strut brace and Sub frames come with car. Duh.
-Lt4 Fuel rail covers, with studs, and uncut. $65 shipped or $60 with car.
-MAC coated headers with y-pipe and enough spare flanges to make your own off road AND cat pipe- $400 shipped or add $350 to car
-Corsa Powerpulse catback $575 shipped or $525 with car
-Scanmaster $190 shipped with gauge bezel and spare vent AND wired with an OBD 2 connector ($15 free), or $175 with car and spare bezel and vent and wired with connector for ease of removal and dumbasses dont mess up your ecu with two things plugged in.
-SLP CAI $135 shipped or $120 with car
-Spare pair of ff75 foglights with everything (New in box) $75 shipped (there still is a set on the car)
-Spare lt1 radiator $50 shipped
-Spare lt1 AC condensor $40 shipped
-Stock lt1 valvetrain (springs, lifters, rockers, pushrods, cam, locks, retainers etc etc) $30 shipped (which is mostly shipping)
-Spare 99 ls1 springs removed from a z28 for the Suspension upgrade from SLP with 20 miles on them. $50 shipped
-Spare airdam $15 shipped
-Spare Ebrake handle/assembly from a 2000 Z28 $25 shipped
-Spare Radiator shroud $15 shipped
-Stock intake box and tube $10 shipped if someone takes the CAI with the car, else the stock goes with the car instead.

IT MUST GO! MONEY TALKS!

(I take paypal *premium* and have a 100% ebay rating of 40 (should be higher, but people dont leave feedback)

Last edited by Geoff Chadwick; Aug 25, 2003 at 08:01 PM.
Old Aug 25, 2003 | 07:01 PM
  #2  
Geoff Chadwick's Avatar
Thread Starter
Registered User
 
Joined: Apr 2002
Posts: 2,154
From: All around
UPDATED POST AND PRICES!
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
edxiel
LT1 Based Engine Tech
10
Jan 24, 2015 07:40 PM
Brandon Wittmer
General 1967-2002 F-Body Tech
3
Dec 3, 2014 09:28 PM
joe777107
Cars For Sale
1
Dec 1, 2014 09:32 AM
squarehead
General 1967-2002 F-Body Tech
0
Nov 21, 2014 08:02 PM
dreamer1q
Car Audio and Electronics
2
Jul 24, 2002 04:39 PM




All times are GMT -5. The time now is 08:27 PM.