FS: 4L60E, Hot Cam, Comp Lifters, Ported LT1 Intake
01-04-2006, 08:57 PM
#1
Registered User
Thread Starter
Join Date: Jun 2005
Posts: 129
FS: 4L60E, Hot Cam, Comp Lifters, Ported LT1 Intake
For Sale:
Steet/Strip 4L60E - This 4L60E tranny was recently build by a professional
transmission shop. The tranny was built with race
frictions and steels, the beast reaction shell, a 29
element input sprag, a 10 vane pump which is prefered
over the 13 vane pump because it has the same amount
of surface area as the 13 vane pump but the vanes take
up less area which crates more volume, hi performance
kevlar band, an elevated pressure regulator spring, and a
transgo HD2-C reprogamming kit which allows full manual
shifting through the gears as well as automatic shifting
while in drive. This tranny was used behind a 450
horsepower engine and had no problem handling the
power. $550 + shipping. SOLD
LT4 Hot Cam - I had this cam in an earlier engine. It is in great shape and
had my 95 camaro goinng 13.4@102 on an otherwise stock engine.
Specs: Duration @ .050: 218/228
Lift with 1.6: .525/.525
$100 + shipping.
Lt1 Intake - This is a fully ported intake that has been port matched to the
LT1 heads and has been bored to accept 58mm throttle body. It
is also painted red to look like an LT4 intake.
$100 + shipping SOLD
Comp Cams Roller Lifters - These are comps hydraulic lifters. They are
supposed to reduce the chance of pump up. They
are part # 850-16 and were used for about 1200
miles.
$100 + shipping
Steet/Strip 4L60E - This 4L60E tranny was recently build by a professional
transmission shop. The tranny was built with race
frictions and steels, the beast reaction shell, a 29
element input sprag, a 10 vane pump which is prefered
over the 13 vane pump because it has the same amount
of surface area as the 13 vane pump but the vanes take
up less area which crates more volume, hi performance
kevlar band, an elevated pressure regulator spring, and a
transgo HD2-C reprogamming kit which allows full manual
shifting through the gears as well as automatic shifting
while in drive. This tranny was used behind a 450
horsepower engine and had no problem handling the
power. $550 + shipping. SOLD
LT4 Hot Cam - I had this cam in an earlier engine. It is in great shape and
had my 95 camaro goinng 13.4@102 on an otherwise stock engine.
Specs: Duration @ .050: 218/228
Lift with 1.6: .525/.525
$100 + shipping.
Lt1 Intake - This is a fully ported intake that has been port matched to the
LT1 heads and has been bored to accept 58mm throttle body. It
is also painted red to look like an LT4 intake.
$100 + shipping SOLD
Comp Cams Roller Lifters - These are comps hydraulic lifters. They are
supposed to reduce the chance of pump up. They
are part # 850-16 and were used for about 1200
miles.
$100 + shipping
Last edited by 95Zedder; 01-09-2006 at 10:37 PM.
01-04-2006, 09:11 PM
#2
Registered User
Join Date: Dec 2002
Location: Gretna, NE
Posts: 1,695
Re: FS: 4L60E, Hot Cam, Comp Lifters, Ported LT1 Intake
Please put me first in line on the hotcam. If you can send pics to ddr698@Hotmail.com and let me know what shipping to 68033 would be, thanks!
Dan
Dan
01-05-2006, 10:21 AM
#5
Registered User
Join Date: Feb 2005
Location: Northern New Jersey
Posts: 73
Re: FS: 4L60E, Hot Cam, Comp Lifters, Ported LT1 Intake
please put first for the intake... send pics to slasherbarb922@optonline.net and let me know what shipping is to 07502..thanx
01-05-2006, 01:02 PM
#6
Registered User
Join Date: Oct 2004
Posts: 340
Re: FS: 4L60E, Hot Cam, Comp Lifters, Ported LT1 Intake
I sent a pm a few days ago about the intake, wanted pictures too.
JMK8504@sbcglobal.net thanks
JMK8504@sbcglobal.net thanks
01-05-2006, 02:25 PM
#7
Registered User
Join Date: Dec 2005
Location: Syracuse NY
Posts: 234
Re: FS: 4L60E, Hot Cam, Comp Lifters, Ported LT1 Intake
Just wondering what the mileage on the transmission is and how much shipping to 13211 would be?
Let me know for I am quite interested because my transmission decided to commit suicide.
Let me know for I am quite interested because my transmission decided to commit suicide.
01-05-2006, 04:29 PM
#8
Registered User
Join Date: Nov 2004
Location: EAST MOUNTAIN TEXAS
Posts: 335
Re: FS: 4L60E, Hot Cam, Comp Lifters, Ported LT1 Intake
01-06-2006, 07:02 PM
#10
Registered User
Join Date: Apr 2005
Location: Chicago Area
Posts: 361
01-06-2006, 07:23 PM
#11
Registered User
Join Date: Jul 2003
Location: Thousand Oaks
Posts: 735
01-06-2006, 08:48 PM
#12
Registered User
Join Date: Oct 2004
Posts: 340
Re: FS: 4L60E, Hot Cam, Comp Lifters, Ported LT1 Intake
Sent an email last night. Is there any way you can get a good picture of the intake runners, and i didnt quite understand the email... they are or are not ported? Let me know, i have money waiting.
01-07-2006, 11:10 AM
#15
Registered User
Join Date: Jul 2003
Location: Thousand Oaks
Posts: 735
Re: FS: 4L60E, Hot Cam, Comp Lifters, Ported LT1 Intake
You sent me an email but I think u forgot to attach the pics. I'm very interested in the intake. If you could reply back to the email I sent you I'd appreciate it. Phil.Sheng@Gmail.com