FS: 355 Nitrous Shortblock, Alternator/Relocation Bracket, MSD Wires, LT4 Starter
Thread Starter
Registered User
Joined: Jul 2002
Posts: 1,193
From: San Diego, CA
FS: 355 Nitrous Shortblock, Alternator/Relocation Bracket, MSD Wires, LT4 Starter
355 Nitrous Shortblock, Alternator/Relocation Bracket, MSD Plug Wires, Stock WP, LT4 Starter
Pictures - http://picasaweb.google.com/snvent/L...ey=7T-fAe4v3-0
355 Forged Shortblock Built For LOTS of Nitrous - $1675
If you want a bottom end to hold up to LOTS of nitrous, this is the bottom end for you. Includes custom Diamond Nitrous pistons with lowered ring lands and upgraded wrist pins, Eagle 6.0in H-beam rods with the ARP L-19 bolt upgrade, Eagle 3.48 forged crank, Pro-gram Billet Splayed Main Caps, ARP main studs, Melling M55HV pump, Cloyes Billet single roller unvented opti specific timing chain ($400+). The block is decked to zero. Compression works out to be 11:1 depending on heads/gaskets. It also includes the timing cover. The engine was running great when I pulled it out. The motor has about 6000 miles on it in 4 years. The last two years it got maybe a couple hundred of those miles. I will freight this for the actual shipping cost at the owners expense.
LT4 Starter - $60
Perfect working condition and cleared my Jet Hot long tubes with tons of space. Started my car pass after pass. Has 6-7k miles on it. Its about 3 years old.
LS1 Lid Conversion Kit for LT1 - $130
Includes lid, radiator support, KN drop in filter, smooth bellows for connecting MAF to TB.
LS1 Aluminum Driveshaft - $100
Has about 75k miles on it and came off an 01 WS6. Looks great.
Stock LT1 Water Pump - $25
I pulled the water pump off the car to swap to an electric WP. The pump is a GM factory pump with 5K miles on it. No problems and worked great when I removed it.
LT1 Steam Pipe/Vent Tube - $10
LT1 Dog Bones/Spider - $10
Digital WOT Switch - $25
Bought it from Dynotune and removed it for an FJO controller. Works great. Detects TPS and sends power to a relay at desired TPS level.
All parts are PLUS shipping. If the part is over $100 please add 3% for Paypal fees. I will accept money orders but they have to clear before I will ship. All prices are OBO. You can PM me or email me at snvent(at)gmail.com
Pictures - http://picasaweb.google.com/snvent/L...ey=7T-fAe4v3-0
355 Forged Shortblock Built For LOTS of Nitrous - $1675
If you want a bottom end to hold up to LOTS of nitrous, this is the bottom end for you. Includes custom Diamond Nitrous pistons with lowered ring lands and upgraded wrist pins, Eagle 6.0in H-beam rods with the ARP L-19 bolt upgrade, Eagle 3.48 forged crank, Pro-gram Billet Splayed Main Caps, ARP main studs, Melling M55HV pump, Cloyes Billet single roller unvented opti specific timing chain ($400+). The block is decked to zero. Compression works out to be 11:1 depending on heads/gaskets. It also includes the timing cover. The engine was running great when I pulled it out. The motor has about 6000 miles on it in 4 years. The last two years it got maybe a couple hundred of those miles. I will freight this for the actual shipping cost at the owners expense.
LT4 Starter - $60
Perfect working condition and cleared my Jet Hot long tubes with tons of space. Started my car pass after pass. Has 6-7k miles on it. Its about 3 years old.
LS1 Lid Conversion Kit for LT1 - $130
Includes lid, radiator support, KN drop in filter, smooth bellows for connecting MAF to TB.
LS1 Aluminum Driveshaft - $100
Has about 75k miles on it and came off an 01 WS6. Looks great.
Stock LT1 Water Pump - $25
I pulled the water pump off the car to swap to an electric WP. The pump is a GM factory pump with 5K miles on it. No problems and worked great when I removed it.
LT1 Steam Pipe/Vent Tube - $10
LT1 Dog Bones/Spider - $10
Digital WOT Switch - $25
Bought it from Dynotune and removed it for an FJO controller. Works great. Detects TPS and sends power to a relay at desired TPS level.
All parts are PLUS shipping. If the part is over $100 please add 3% for Paypal fees. I will accept money orders but they have to clear before I will ship. All prices are OBO. You can PM me or email me at snvent(at)gmail.com
Last edited by tireburnin; Jun 15, 2008 at 02:44 PM.
Registered User
Joined: Oct 2001
Posts: 584
From: NC Burlington
wow i guess the other motor is already being built huh? well i will have to look around and see if i can find it on saturday. Anything i find with "Sean" on it, i am going to lick it so you don't want it. Then take it home with me muhahhah muhahaha
Thread Starter
Registered User
Joined: Jul 2002
Posts: 1,193
From: San Diego, CA
Tell them I want the sledge hammer grind for my cam because I love broken parts.
