F/S 383 shortblock
Thread Starter
Registered User
Joined: Sep 2001
Posts: 70
From: Newark, DE
F/S 383 shortblock
looking to sell my 383
94 F-body lt-1 block w/ 4 bolt Billet splayed caps has been hot tanked
new cam bearings and plugs
mag block
line bore, hone, drill and tap (for splayed caps)
bore and hone with plate
parallel deck
balance crank, flexplate and dampner
hone dampner
parts i have are....
SRP forged pistons 11.8.1
Manley 6" forged rods
eagle 4340 forged steel crank
Manley oil pump stud
Canton oil pump shaft
Canton F-body oil pan
Canton pick up
Canton oil filter adapter
ATI super Dampner
B+M flexplate
Manley head bolts and washers
Manley race dbl roller timing chain
clevite main and rod bearings
everything is brand new in bags or boxes.......
i have $4,700 invested and will sell for $4,200...($500 savings)
i will not part out and would like for this to be picked up...........i live in Delaware and will travel some to meet.........
94 F-body lt-1 block w/ 4 bolt Billet splayed caps has been hot tanked
new cam bearings and plugs
mag block
line bore, hone, drill and tap (for splayed caps)
bore and hone with plate
parallel deck
balance crank, flexplate and dampner
hone dampner
parts i have are....
SRP forged pistons 11.8.1
Manley 6" forged rods
eagle 4340 forged steel crank
Manley oil pump stud
Canton oil pump shaft
Canton F-body oil pan
Canton pick up
Canton oil filter adapter
ATI super Dampner
B+M flexplate
Manley head bolts and washers
Manley race dbl roller timing chain
clevite main and rod bearings
everything is brand new in bags or boxes.......
i have $4,700 invested and will sell for $4,200...($500 savings)
i will not part out and would like for this to be picked up...........i live in Delaware and will travel some to meet.........
Last edited by anotherZfan; Dec 31, 2003 at 05:05 AM.
Registered User
Joined: Jul 2003
Posts: 374
From: Great White North
I think its a decent price. The stuff that costs money here are the extras...like ATI dampener, Neutral balance flex plate, Full internal balance and the machine work. The only parts in this short I don't like are the pistons. For all that work and money to use a budget piston doesn't make any sense. but to each there own. I think its a fair deal. JMHO!
Vince
Vince
Thread Starter
Registered User
Joined: Sep 2001
Posts: 70
From: Newark, DE
Originally posted by spraytheway
I think its a decent price. The stuff that costs money here are the extras...like ATI dampener, Neutral balance flex plate, Full internal balance and the machine work. The only parts in this short I don't like are the pistons. For all that work and money to use a budget piston doesn't make any sense. but to each there own. I think its a fair deal. JMHO!
Vince
I think its a decent price. The stuff that costs money here are the extras...like ATI dampener, Neutral balance flex plate, Full internal balance and the machine work. The only parts in this short I don't like are the pistons. For all that work and money to use a budget piston doesn't make any sense. but to each there own. I think its a fair deal. JMHO!
Vince
Thread Starter
Registered User
Joined: Sep 2001
Posts: 70
From: Newark, DE
i'm not sure how much the machine shop decked the block....thats a ? i should know the answer to......i am sure it was minimal just to square everything up
no camshaft...i didnt get that far..........
no camshaft...i didnt get that far..........
Last edited by anotherZfan; Jan 10, 2004 at 09:09 PM.
Thread
Thread Starter
Forum
Replies
Last Post
