F-Body Parts Need To Sell
F-Body Parts Need To Sell
1. Brand New SLP AIR TEMPERATURE MODULE $15.00
2. Brand New SLP SKIP SHIFT ELIMINATOR $15.00
3. Used LT1 Intake off of a 96 z28 with 60,xxx miles $50.00
4. Used Lt1 Alternator Accy Bracket $30.00
5. EGR Block-Off Plates for LT1 Intakes $15.00 Shipped
6. 93-97 LT1 Lower Hood Latch Assembly $25
7. Used LT1 Starter 60,xxx miles $30.00
8. Pair of 17x9.5 American Racing Torque Thrust II's Style 505 5x4.75 bolt pattern. Came off of a 96 camaro z28. Used for 3 months last summer, are not mounted on tires. They still look brand new. No Scratches, No Dents, or Dings Asking $425 O.B.O
9. BRAND NEW Pair of Mickey Thompson ET STREETs 26.0X11.5-17
Never Used or Mounted. $325.00 O.B.O.
10. Used Aluminum DriveShaft $125.00
(out of a LT1 with Stock Rear End)
11. Used Slp Bolt-In DriveShaft Loop $45.00
12. Stage II Built 4L60E Transmission:
Bushing Kit, Master Overhaul Kit, New OEM Style Filter, Updated SKF Input Sprag, New Washers And Bearings, Updated Low Roller Clutch, New Steel Oil Pan, Raybestos Indy Red Clutches, Reprogrammed & Updated Street & Strip Valve Body, Valve Body Spacer Plate, New Internal Wire Harness, New EPC Solenoid, New Shift Solenoids, New Speed Sensor, New 13 Van Pump Rotor, Corvette 2nd Servo, Super 4th Gear Servo, New Selector Shaft, Raybestos Pro Series 2-4 Band, Upgraded Beast Sunshell, Molded Steel & Rubber Pistons For Input Drum.
Comes with a BM Deep trans pan drilled and tapped for trans temp gauge
also comes with a 2 1/16 trans temp gauge.
$1100.00 Used for 20 miles
RATING: 600HP/550TQ
13. CONVERTER:
PRECISION INDUSTRIES CONVERTERS
9.5" VIGILANTE LOCK-UP 3600 Stall TORQUE CONVERTER-built to handle all out racing, high quality, proven MINIMUM 4/10, Was used for 2000 miles and was just sent to precision for a upgrade.$350.00
Please Feel Free To Email me for Pictures Or Any Questions
Joes96z@yahoo.com
2. Brand New SLP SKIP SHIFT ELIMINATOR $15.00
3. Used LT1 Intake off of a 96 z28 with 60,xxx miles $50.00
4. Used Lt1 Alternator Accy Bracket $30.00
5. EGR Block-Off Plates for LT1 Intakes $15.00 Shipped
6. 93-97 LT1 Lower Hood Latch Assembly $25
7. Used LT1 Starter 60,xxx miles $30.00
8. Pair of 17x9.5 American Racing Torque Thrust II's Style 505 5x4.75 bolt pattern. Came off of a 96 camaro z28. Used for 3 months last summer, are not mounted on tires. They still look brand new. No Scratches, No Dents, or Dings Asking $425 O.B.O
9. BRAND NEW Pair of Mickey Thompson ET STREETs 26.0X11.5-17
Never Used or Mounted. $325.00 O.B.O.
10. Used Aluminum DriveShaft $125.00
(out of a LT1 with Stock Rear End)
11. Used Slp Bolt-In DriveShaft Loop $45.00
12. Stage II Built 4L60E Transmission:
Bushing Kit, Master Overhaul Kit, New OEM Style Filter, Updated SKF Input Sprag, New Washers And Bearings, Updated Low Roller Clutch, New Steel Oil Pan, Raybestos Indy Red Clutches, Reprogrammed & Updated Street & Strip Valve Body, Valve Body Spacer Plate, New Internal Wire Harness, New EPC Solenoid, New Shift Solenoids, New Speed Sensor, New 13 Van Pump Rotor, Corvette 2nd Servo, Super 4th Gear Servo, New Selector Shaft, Raybestos Pro Series 2-4 Band, Upgraded Beast Sunshell, Molded Steel & Rubber Pistons For Input Drum.
Comes with a BM Deep trans pan drilled and tapped for trans temp gauge
also comes with a 2 1/16 trans temp gauge.
$1100.00 Used for 20 miles
RATING: 600HP/550TQ
13. CONVERTER:
PRECISION INDUSTRIES CONVERTERS
9.5" VIGILANTE LOCK-UP 3600 Stall TORQUE CONVERTER-built to handle all out racing, high quality, proven MINIMUM 4/10, Was used for 2000 miles and was just sent to precision for a upgrade.$350.00
Please Feel Free To Email me for Pictures Or Any Questions
Joes96z@yahoo.com
Re: F-Body Parts Need To Sell
remaxracer45 I can go $65 for both if you can pick them up.
BIGCOWL-IMP I cant go that low on the tires with shipping, they are brand new. The converter was a 3000 stall I upgraded to a 3600. I bought the trans from speed inc. www.ls1speed.com Dr. Evil built the trans for them. If you have any concerns go to speeds site and look up 96 camaro Z28 and transmissions it will be there under the second choice
thanks Joe
BIGCOWL-IMP I cant go that low on the tires with shipping, they are brand new. The converter was a 3000 stall I upgraded to a 3600. I bought the trans from speed inc. www.ls1speed.com Dr. Evil built the trans for them. If you have any concerns go to speeds site and look up 96 camaro Z28 and transmissions it will be there under the second choice
thanks Joe
Re: F-Body Parts Need To Sell
ram air camaro I will check shipping out for you. I dont know if it can go UPS or not. I will find out, give me a couple of days thanks.
JodyJ You have email
BIGCOWL-IMP the converter was used for 20 miles after that
JodyJ You have email
BIGCOWL-IMP the converter was used for 20 miles after that
Re: F-Body Parts Need To Sell
8. Pair of 17x9.5 American Racing Torque Thrust II's Style 505 5x4.75 bolt pattern. Came off of a 96 camaro z28. Used for 3 months last summer, are not mounted on tires. They still look brand new. No Scratches, No Dents, or Dings Asking $425 O.B.O CAN YOU DO 400 SHIPPED TO 77018
Re: F-Body Parts Need To Sell
Originally Posted by Joes96z
ram air camaro I will check shipping out for you. I dont know if it can go UPS or not. I will find out, give me a couple of days thanks.
JodyJ You have email
BIGCOWL-IMP the converter was used for 20 miles after that
JodyJ You have email
BIGCOWL-IMP the converter was used for 20 miles after that
Thanks,
Jody J.
Thread
Thread Starter
Forum
Replies
Last Post
Moshbmx1
Parts For Sale
1
Jan 20, 2015 03:27 PM



