Fully adjustable lower control arms and panhard - 150 for each.
3.73 ring/pinion for F-Body - $160
Complete carrier for f-body - $100
Xcelite coax crimper kit - $100
RF Industries coax crimper kit - $100
Lanscaper NT750 network testing kit - $300
40gb external USB hard drive - $100
Quadra jet 800cfm carb, 50 miles since NEW - $200
Edelbrock 600 carb, 4000 miles since new. - $200
Harley Fatboy sissy bar w/ backrest pad and custom solo seat - $100
Th350 stock stall - $40
2 Orion 15's in a box - $120
Pilot fog lights - $20
a box made for a Ford extended cab pickup for 2 10's - $60
a 10" JBL sub in a q-logic box - $60
10" Kicker competition sub in a nice box - $80
alpine tape player head unit - $60
Clarion CD head unit - $120
Audiobahn 6x9's - $60
Pioneer 6.5's - $60
Audiobahn 6.5"s - $60
MTX 6500d 775w mono-block amp - $100
Rockford Fosgate Punch 125.2 amp - $60
Battery cutoff switch - $10
Rounded IDE and Floppy cables, silver braid and blue
Thermaltake RAM heatsinks
DVD drives, burners, cd drives
West Bend radar gun - $100
Magnetic strip (credit card) reader/writer - $200
HPI RS4 Sport2 R/C car, comes with 3 sets of wheels, 4 motors, 4 bodies, this thing is VERY upgraded. Over $1000 invested. - $400 (price drop)
PAC-1 OEM converter. (run subs in your f-body without cutting any wires) - $80
Pontiac 400ci heads (6x-4) - $80
3" y-pipe with cutout. Needs flanges welded on. - $40
Black plastic Racing Seat w/ cover from Summit. - $50
Chrome Water temp, Voltage and Oil pressure guages. - $40
LT1 Ported/Gasket-matched Intake with emissions blockoff plates - $200
LT1 Intake Spider - $20
LT1 Water pump - $75
LT1 Water pump -> Opti coupling - $20
LT1 Vented opti timing cover - $40
Eibach 1.5" lowering springs - $150
LT1 A4 cross member - $20
Tranny dipstick/tubes for th400 and 4l60e - $10
LT1 OBDII PCM (x2) - $100
'99 Speedometer gauge cluster - $120
Grey a4 center console - top piece (shifter, ash tray, etc) - $20 (SOLD)
Tail light center section with Firebird bird on it - $30
Antenna - $20
New clevite LT1 cam bearings - $10
NX n2o/timing controller - $200
IAT extender - $5
LS1 fuel rails - $100
LS1 Injectors - $100
LS6 intake blockoff things - $10
LT1 throttle body - $60
LT1 A/C compressor - $120
MAF sensor - $80
Trans Am rear view mirror - $40
Rear cargo-area carpet - $60
non-monsoon head unit - $50
ABS thingie (by the fuse box in the engine bay)
LT1 front calipers/ rotors - $100
LT1 front spindles/ calipers - $200
Pontiac guage cluster bezel - $40
LT1 fuel rail - $100 (SOLD)
LT1 injectors - $100
complete fuel lines - $60
steel driveshaft - $70 (SOLD)
SLP fan switch - $60 (SOLD)
BMR Strut Tower Brace (Black) - $100
Kenwood KDC-722 motorized flip-face head unit - $150
Spyder TL paintball gun with paintballs, 2 full tanks, mask, etc. - $200
Nikon Coolpix 2500 digital camera - $300
HP 1.79GHz Laptop - $800
1986 Chevy 3/4 ton 4x4 truck on 35" tires, ready to go wheelin! - $4000


Although it is all thought to be in perfect working condition, everything is sold as-is to prevent any trouble. I am located in northeast Houston, TX. Shipping is not included in the listed prices. I am open to trades, right now I'm looking for a cam, rockers, rims and other misc. fun stuff.

 

Have the Eibach springs been used before?

 

do you have any pics of the 3.73s? and are they a 2 or 3 sieries?

 

Is Kingwood close to S'port LA?

 

I'll take the vented opti timing cover if it's in good shape. Do you have anything else for a vented/non-vented opti swap? Like the wiring harness, vacuum lines?

What is the water pump/opti coupling?

Thanks!
Charlie

 

The Eibach springs have about 4000 miles on them. They are still on the car.

I can get you pics of the 3.73's today. They come with several shims and misc. install parts. I'll have to check and see if they're for 2 or 3 series carrier.

Kingwood is northeast of Houston. On Lake Houston.

I'm not sure if I have any other opti swap goodies. I'll look into it for you. I may have an extra timing cover and some bolts? The opti-water pump coupling is thelittle fitting that goes on the back side of the opti that actually turns the rotor. It's a very small piece that's easy to lose and the dealer wants like $60 for a replacement.

 

Do you have a pic. of you NX n2o/timing controller?
www.grumpyjp63@yahoo.com

 

Well, let me know if you find the electrical connector or the vacuum lines. Otherwise, I'll take the vented opti timing cover. How much to ship to 60611?

 

head unit for a 95 ta? Delco? 500 watt system setup? cd player works?

 

I'll try to get a pic of the NX for you.

I'll let you know tonight or tomorrow when I get home. The timing cover should be about $22 to ship there.

CD player works fine. I'm not sure about 500w. It's a Delco.

 

Is that $50 shipped for the seat?

 

No, I'd prefer a local sale on it. It's pretty large and would be quite a hassle to ship.

 

I hear ya, well if you ever get close to Shreveport, LA let me know we can work something out. Id like to have it to tinker with.
Email me if you change your mind @ aformula8u@aol.com
Clint

 

LT1 A/C compressor - $50

How many miles was the compressor on the car for? Functional w/ no problems when you took it off? If so how much shipped to Dallas 75248? Thanks.

Kevin

 

10" jbl in q-logic box...is this the one that fits in the rear compartment of the camaro/firebird coupe?