Eagle 6" ESP H-Beam rods
#1
Eagle 6" ESP H-Beam rods
I have a complete set that are brand new, still in the plastic. The instructions, lube and stickers are still sealed in plastic also. I wanted to use them but since having a kid, house and my job, I have no time to do anything. So instead of leting them sit in the closet I am going to sell them and hope someone has a better use for them than me.The part number is CRS6000B3D and they have the chromemoly 8740 fasteners.They should fit all SBC including LT1/LT4 Gen II engines. I am looking to get $300 shipped (UPS) which is still about $130 cheaper than buying them thru Summit or Jegs.
I do have pics if anyone needs them.
Here is some more info on them:
Brand: Eagle Specialty Products
Product Line: Eagle ESP H-Beam Connecting Rods
Part Type: Connecting Rods
Part Number: ESP-6000B3D
Connecting Rod Length Center To Center (in): 6.000 in.
Connecting Rod Beam Style: H-beam
Connecting Rod Material: Forged 4340 steel
Connecting Rod Finish: Shot-peened
Wrist Pin Style: Floating
Cap Retention Style: Cap screw
Connecting Rod Bolt Brand: ARP
Connecting Rod Bolt Diameter: 7/16 in.
Connecting Rod Bolt Material: 8740 chromemoly steel
Fastener Yield Strength (psi): 190,000 psi
Connecting Rod Bolt Head Style: 12-point
Pressurized Pin Oiling: No
Approximate Connecting Rod Weight (g): 645
Big End Bore Diameter (in): 2.100 in.
Pin End Bore Diameter (in): 0.927 in.
Advertised Horsepower Rating (hp): 700 hp
Advertised RPM Rating: 7,500 rpm
Weight Matched Set: Yes
Remanufactured: No
Balanced: No
Magnafluxed: Yes
Quantity:
I do have pics if anyone needs them.
Here is some more info on them:
Brand: Eagle Specialty Products
Product Line: Eagle ESP H-Beam Connecting Rods
Part Type: Connecting Rods
Part Number: ESP-6000B3D
Connecting Rod Length Center To Center (in): 6.000 in.
Connecting Rod Beam Style: H-beam
Connecting Rod Material: Forged 4340 steel
Connecting Rod Finish: Shot-peened
Wrist Pin Style: Floating
Cap Retention Style: Cap screw
Connecting Rod Bolt Brand: ARP
Connecting Rod Bolt Diameter: 7/16 in.
Connecting Rod Bolt Material: 8740 chromemoly steel
Fastener Yield Strength (psi): 190,000 psi
Connecting Rod Bolt Head Style: 12-point
Pressurized Pin Oiling: No
Approximate Connecting Rod Weight (g): 645
Big End Bore Diameter (in): 2.100 in.
Pin End Bore Diameter (in): 0.927 in.
Advertised Horsepower Rating (hp): 700 hp
Advertised RPM Rating: 7,500 rpm
Weight Matched Set: Yes
Remanufactured: No
Balanced: No
Magnafluxed: Yes
Quantity:
#2
try these, it is my first time posting pictures using photobucket
http://i265.photobucket.com/albums/i...n/CIMG2549.jpg
http://i265.photobucket.com/albums/i...n/CIMG2548.jpg
http://i265.photobucket.com/albums/i...n/CIMG2549.jpg
http://i265.photobucket.com/albums/i...n/CIMG2548.jpg
Thread
Thread Starter
Forum
Replies
Last Post