dyno only lt1 crate engine ported polished heads 95pmc, harness, everything! $1600$
01-16-2007, 11:05 AM
#1
Registered User
Thread Starter
Join Date: May 2001
Location: fort worth/burleson Tx
Posts: 1,513
dyno only lt1 crate engine ported polished heads 95pmc, harness, everything! $1600$
Link to where they bought it and cost
a local friend has it all. he got it outta a trade.
it consists of a gm crate lt1 with no miles on it, as soon as the owner got it he pulled the stock cam and added some aftermarket cam as well as ported polished heads with 2.02 1.60 manley race valves, cam and dynoed it. NEVER BEEN IN A CAR!
COMES WITH THESE HEADS!: lt1 casting 561's 2.02 1.60 manley race valves, ported, polished, k-motion double springs good to .600 lift, titainium retainers, guidplates. all included!!!
you can tell it has barley been ran, its all brand new no carbon anywhere except the top of the pistons. it is disassembled because my the purchaser was going to build it up and after he got it apart decieded his house payments were more important.
the rods are perfect as well as the crank. it even has the exhaust manifold they sent with it in the crate with all kinds of weird sensors all over it?
new waterpump new injectors its all brand new new opti new as. bracket, 95 pcm and wireing harness included with it. even the brand new gm coil and icm ITS ALL HERE!!! he is asking 1600, plus shipping costs. if you want to pick up that is fine.
It has all been sprayed with grease and wrapped.
here are the pics of it: everything you see is included
a local friend has it all. he got it outta a trade.
it consists of a gm crate lt1 with no miles on it, as soon as the owner got it he pulled the stock cam and added some aftermarket cam as well as ported polished heads with 2.02 1.60 manley race valves, cam and dynoed it. NEVER BEEN IN A CAR!
COMES WITH THESE HEADS!: lt1 casting 561's 2.02 1.60 manley race valves, ported, polished, k-motion double springs good to .600 lift, titainium retainers, guidplates. all included!!!
you can tell it has barley been ran, its all brand new no carbon anywhere except the top of the pistons. it is disassembled because my the purchaser was going to build it up and after he got it apart decieded his house payments were more important.
the rods are perfect as well as the crank. it even has the exhaust manifold they sent with it in the crate with all kinds of weird sensors all over it?
new waterpump new injectors its all brand new new opti new as. bracket, 95 pcm and wireing harness included with it. even the brand new gm coil and icm ITS ALL HERE!!! he is asking 1600, plus shipping costs. if you want to pick up that is fine.
It has all been sprayed with grease and wrapped.
here are the pics of it: everything you see is included
Last edited by Critter; 01-16-2007 at 11:21 AM.
01-16-2007, 05:00 PM
#9
Registered User
Thread Starter
Join Date: May 2001
Location: fort worth/burleson Tx
Posts: 1,513
here is what i know in relation to shipping
Update: checked on shipping and it will be around $250 depending on where to!
__________________
IF IT COSTS LESS I WILL NOT KEEP THE EXTRA $$$! i will keep receipts of everything down to the nails and ship them with it so you know i'm not raping you on the shipping.
Update: checked on shipping and it will be around $250 depending on where to!
__________________
IF IT COSTS LESS I WILL NOT KEEP THE EXTRA $$$! i will keep receipts of everything down to the nails and ship them with it so you know i'm not raping you on the shipping.
Last edited by Critter; 01-18-2007 at 01:32 AM.
