Dynatech longtubes and true duals f.s.-pics + more!!
Thread Starter
Registered User
Joined: Nov 1999
Posts: 18
From: St. Charles, MO USA
Dynatech longtubes and true duals f.s.-pics + more!!
Email - tsmalley@charter.net -I don't check this board often, email is the best way to contact me.
LS1 Dynatech 1 3/4" Longtubes with 3" slip on collectors, Headers are coated and have less than 200 miles, Collectors have 3 bolt flange welded on-mates up to 3" mandrel bent true duals into an x-pipe and out into dynomax bullets w/ dumps. Everything is almost new-less than 200 miles. This setup costs over 1100.00 new---------SOLD
Duals were custom made to mate up w/ the dynatechs, but any muffler shop could easily modify them to work with any ls1 longtube.
Or-----------------400.00 for the headers, 250 for the duals
I will only separate if the duals are sold. I don't want this sitting around in my garage.
Pics are here: http://photobucket.com/albums/v484/StusWS6/
Need Kooks stepped headers or possibly 1 7/8 with a 3.5" collector, and an asp sfi balancer.
Katech timing chain-has 200 miles-fits stock timing set-50.00
Nx nitrous switch panel-------------------SOLD
Stock ls1 lifters-less than 40k(99 WS6)---------50.00 obo
Stock 26lb injectors from 99 WS6-less than 40k---------50.00 obo
Stock 99 T/a a/c compressor--less than 40k----------75.00
LS1 Dynatech 1 3/4" Longtubes with 3" slip on collectors, Headers are coated and have less than 200 miles, Collectors have 3 bolt flange welded on-mates up to 3" mandrel bent true duals into an x-pipe and out into dynomax bullets w/ dumps. Everything is almost new-less than 200 miles. This setup costs over 1100.00 new---------SOLD
Duals were custom made to mate up w/ the dynatechs, but any muffler shop could easily modify them to work with any ls1 longtube.
Or-----------------400.00 for the headers, 250 for the duals
I will only separate if the duals are sold. I don't want this sitting around in my garage.
Pics are here: http://photobucket.com/albums/v484/StusWS6/
Need Kooks stepped headers or possibly 1 7/8 with a 3.5" collector, and an asp sfi balancer.
Katech timing chain-has 200 miles-fits stock timing set-50.00
Nx nitrous switch panel-------------------SOLD
Stock ls1 lifters-less than 40k(99 WS6)---------50.00 obo
Stock 26lb injectors from 99 WS6-less than 40k---------50.00 obo
Stock 99 T/a a/c compressor--less than 40k----------75.00
Last edited by tsmalley; Oct 29, 2004 at 03:03 AM.
Registered User
Joined: Jan 2002
Posts: 1,469
From: J-ville,NC
Re: Dynatech longtubes and true duals f.s.-pics + more!!
very interested. Please send me pics. This is for an LT1 right? How was ground clearance? Is shipping included?
Last edited by wicked_95z; Oct 25, 2004 at 08:42 PM.
Thread Starter
Registered User
Joined: Nov 1999
Posts: 18
From: St. Charles, MO USA
Re: Dynatech longtubes and true duals f.s.-pics + more!!
Originally Posted by wicked_95z
very interested. Please send me pics. This is for an LT1 right? How was ground clearance? Is shipping included?
The headers/duals are for an ls1 car. All prices are plus shipping.
Thread
Thread Starter
Forum
Replies
Last Post
RX Speed Works
Supporting Vendor Group Purchases and Sales
3
Oct 1, 2015 10:19 PM
tdigger9899
General 1967-2002 F-Body Tech
9
Sep 7, 2015 10:56 AM