Delteq system almost complete.
10-12-2009, 03:55 AM
#1
Registered User
Thread Starter
Join Date: Nov 2004
Location: El Paso TX
Posts: 197
Delteq system almost complete.
Delteq 1013 for reference-http://www.delteq.com/opti_pricing.htm
I have a complete system minus a fully functioning opti box. I do have it but a component inside failing. the 5V reference signal is slowly bleading down while running and then shuts the system down. For anyone with any electrical experience can replace the resistor with some research. I did not have time. You can bypass this safety feature with a jumper and resistor and it will take 25 cents and alittle brain power. I will mark on the wire diagram in the installation manual which wire is giving it the problems.
The ICM, coils, valve cover bracket, heat shield, and plug wires all in perfect shape, used for 5000 miles maybe. I did this because I thought I had an opti going out, because of a stumble, but come to find out I had a head leak which I fixed after months of trouble shooting, then the delteq started giving me problems.
I have to sell it complete so if your just looking for the ICM or Coils, you gotta but it all then you can split it up and recoupe some funds.
Delphi Ignition Module
4 Twin-Tower Ignition Coils
Application-Specific Mounting Brackets
Opti-Box Signal Adapter
Plug 'n' Play Wiring Harness with factory color codes
Note: Factory Tach Filter must be removed (some vehicles)
Custom 8mm Double Silicone Ignition Wires
$450 cause of the fix you have to do to make it work as a complete system.
Email me at matthew.stauffer@us.army.mil for questions.
Paypal.
I have a complete system minus a fully functioning opti box. I do have it but a component inside failing. the 5V reference signal is slowly bleading down while running and then shuts the system down. For anyone with any electrical experience can replace the resistor with some research. I did not have time. You can bypass this safety feature with a jumper and resistor and it will take 25 cents and alittle brain power. I will mark on the wire diagram in the installation manual which wire is giving it the problems.
The ICM, coils, valve cover bracket, heat shield, and plug wires all in perfect shape, used for 5000 miles maybe. I did this because I thought I had an opti going out, because of a stumble, but come to find out I had a head leak which I fixed after months of trouble shooting, then the delteq started giving me problems.
I have to sell it complete so if your just looking for the ICM or Coils, you gotta but it all then you can split it up and recoupe some funds.
Delphi Ignition Module
4 Twin-Tower Ignition Coils
Application-Specific Mounting Brackets
Opti-Box Signal Adapter
Plug 'n' Play Wiring Harness with factory color codes
Note: Factory Tach Filter must be removed (some vehicles)
Custom 8mm Double Silicone Ignition Wires
$450 cause of the fix you have to do to make it work as a complete system.
Email me at matthew.stauffer@us.army.mil for questions.
Paypal.
10-19-2009, 01:16 PM
#4
Registered User
Thread Starter
Join Date: Nov 2004
Location: El Paso TX
Posts: 197
Im trying not to split the system up, I would like to sell all I have. I do not have the time right now to sell everything seperate. But if you do the rest may offset your ICM once you sell all the parts.
Thread
Thread Starter
Forum
Replies
Last Post
