Delteq LT1 opti direct
#1
Delteq LT1 opti direct
I have a complete sytem I'm taking off the car. Has worked fine for appr. 1 year. I have the hardware to mount on the valve cover and the fan shroud.
email me with any questions.
425obo
GS355
email me with any questions.
425obo
GS355
#2
Re: Delteq LT1 opti direct
is this the system for asr or w/out?
is the whole coil pack included? (coils and ignition control module)
was the whole coil pack purchased brand new, or taken off a used northstar?
did you order the kit complete from delteq, or as a bare-bones kit?
i am interested in this, but you must clear up a little of the gray areas
is the whole coil pack included? (coils and ignition control module)
was the whole coil pack purchased brand new, or taken off a used northstar?
did you order the kit complete from delteq, or as a bare-bones kit?
i am interested in this, but you must clear up a little of the gray areas
#3
Re: Delteq LT1 opti direct
Grand, I'm not sure what "asr" is? This system was purchased brand new from jim a elitesparkplugs.This a complete set up from module, coils, sparkplug wires, etc. Everything you need. If you would like, you could go to elitesparkplugs.com they have a picture of the completeset up.
Let me know. I'll be taking it off today or tommorrow for boxing.
GS355
Let me know. I'll be taking it off today or tommorrow for boxing.
GS355
#7
Re: Delteq LT1 opti direct
Grand I got you. No my car is a 95 6 spd without it. if you mount it on the fan shroud where I currently have it, It would not be in the way of the traction control.
SS97dlm 425 obo
GS355
SS97dlm 425 obo
GS355
#8
Re: Delteq LT1 opti direct
hmm, I am interested, but why would you go through all the trouble of installing it, only to sell it anyway? That makes no sense. So, what is really wrong with it? There has to be a reason for you to decide you don't want it anymore.
#10
Re: Delteq LT1 opti direct
Firebirdstud, you say go through all that trouble to install it and it was none at all. Its plug and play basicly. The thing I had to do extra was splice my shift light into the harness to get the light to work. I currently have installed in the fan shroud localation. But with my ptk kit on it, i'm going to change up the fan and shroud up on it because I can't keep my car cool enough at idle for me. With all the heat of the turbo , I dont want to locate the coils/opti box over the valve cover and header. Cause we all know heat is not good for electronics. I'm going to put the opti back to use because I had no problem with it before the delteq. The sytem has been on the car almost a year. It ran fine with the blower on it before the swap of the power adder.
Asking price 425 obo
GS355
Asking price 425 obo
GS355