Comp Cams TN227XR Camshaft, BMR Lower Control Arms
Thread Starter
Registered User
Joined: Sep 2000
Posts: 1,249
From: Kingman, AZ
Comp Cams TN227XR Camshaft, BMR Lower Control Arms
Combination Motorsports Comp Cams TN227XR Camshaft
Grind # LT1 3441 / 3442 HR114+4
Serial No B 0452
Part # 07-000-8
Intake Exhaust
Gross valve lift .525 .534
.560 .569 with 1.6 RR's
Duration @ .006
tappet lift 277 283
These specs are for cam installed at 110.0 intake center line
Intake Exhaust
Duration @ .050 227 233
Lobe Lift .3500 .3560
Lobe Seperation 114.0
Only 15K on this cam. Came out of a friends 97 auto car. Went 12.40@109 with 3600 stall. I bought the engine and when with CC306. This cam has just been sitting around.
SOLD
BMR Lower Control Arms.
These have been on my car since i bought it back in 2000. Lol probley 10 years old or dam close to it. There poly on one end and rubber on the other. The rubber ends are pretty much shot. Not sure if you can replace them. I would see why not. But i just bought some new chromoly Spohn's.
$40shipped
Grind # LT1 3441 / 3442 HR114+4
Serial No B 0452
Part # 07-000-8
Intake Exhaust
Gross valve lift .525 .534
.560 .569 with 1.6 RR's
Duration @ .006
tappet lift 277 283
These specs are for cam installed at 110.0 intake center line
Intake Exhaust
Duration @ .050 227 233
Lobe Lift .3500 .3560
Lobe Seperation 114.0
Only 15K on this cam. Came out of a friends 97 auto car. Went 12.40@109 with 3600 stall. I bought the engine and when with CC306. This cam has just been sitting around.
SOLD
BMR Lower Control Arms.
These have been on my car since i bought it back in 2000. Lol probley 10 years old or dam close to it. There poly on one end and rubber on the other. The rubber ends are pretty much shot. Not sure if you can replace them. I would see why not. But i just bought some new chromoly Spohn's.
$40shipped
Last edited by hotrod18_69; Jul 31, 2008 at 12:50 PM.
Thread
Thread Starter
Forum
Replies
Last Post
MIGHTYMOUSE
Car Audio and Electronics
5
Aug 29, 2002 09:18 AM
