I've got a set of comp cams pro-magnum 1.6 self alingning rockers and combination motor sports dual valve springs with seats and retailners. They have exactly 230 miles on them and the engine let go. I'm going with a LE2 cam so they wont work for me any more. The springs are comparable to the comp cams 987's. They dont require any machining to fit. Thunderacing has the rockers for 270$ and the springs for 130. I'll let them go for 300. They'll handle up to .600 lift. Drop me a line....Chris

 

pm sent.

 

I need to sell this stuff, so I'll throw in a set of comp cams hardened p/r's with the same miles (230)

 

what else would i need to instal a cc306?

 

i've asked the same question, so besides springs, hardened p/r's, I've been told lifters since i got a 100k on mine also 30lb injectors were recommended

 

I don't need the springs but I do need the rockers and p/r

 

I could use the pushrods & rockers (I already have the springs)...how much for these two?
Do you have some lifters with same low milage...if so ho much total?
Thanks.

 

This is all ya need to install the 306 cam (new high lift springs is all thats really needed). I had installed it with 80k on motor along with headers and electric w/p. I spun it a little to far a few to many times and it only held together for bout 230-250 miles. Anyways, i've got the stock lifters, but alot of metal went through EVERYTHING, so they would need to be cleaned. 80k on the lifters is not alot, they will hold up for awile. I'd like to let it all go together, lifters go with it for 300 shipped, best i can do..