Comp 8" Hi-Tech 1 Piece Chromemoly Pushrods FS
#1
Registered User
Thread Starter
Join Date: Mar 2002
Location: Johnstown,PA, USA (Flood City)
Posts: 294
Comp 8" Hi-Tech 1 Piece Chromemoly Pushrods FS
1 set (16) used (4300 miles) Comp Hi-Tech 8.000" pushrods.
Part # 7995-16
-1 Piece
-.080" wall thickness
-5/16" diameter
-Heat-treated Chromemoly
All are in excellent condition, straight (I checked each one), with just a bit of the black oxide coating rubbed off from where they touched the guideplates, which is typical.
I went back to a HR cam last winter and sold all my other used SR parts, but not these. Click on links for pics.
G[IMG][/IMG]
[IMG][/IMG]
$80.00 + shipping
- Pictures and more info on request! PM me! I have webshots.com album now, so I can send picture links instead of sending pics through the email!
If you want to Email me at: mmb1211@juno.com
Buyer pays shipping. If interested, PLEASE give me your address so I can get you a shipping cost quickly. Shipping is paid by buyer based on method, weight, size of package and location. Money orders, PAYPAL, and cashiers check only. If using PayPal, Buyer pays PayPal charge. I`ve sold many parts in the past, especially some expensive stuff. Do a search. I aim to please. Thanks to all for past purchases.
Thanks for looking!
-Chad
cdb95z28
Part # 7995-16
-1 Piece
-.080" wall thickness
-5/16" diameter
-Heat-treated Chromemoly
All are in excellent condition, straight (I checked each one), with just a bit of the black oxide coating rubbed off from where they touched the guideplates, which is typical.
I went back to a HR cam last winter and sold all my other used SR parts, but not these. Click on links for pics.
G[IMG][/IMG]
[IMG][/IMG]
$80.00 + shipping
- Pictures and more info on request! PM me! I have webshots.com album now, so I can send picture links instead of sending pics through the email!
If you want to Email me at: mmb1211@juno.com
Buyer pays shipping. If interested, PLEASE give me your address so I can get you a shipping cost quickly. Shipping is paid by buyer based on method, weight, size of package and location. Money orders, PAYPAL, and cashiers check only. If using PayPal, Buyer pays PayPal charge. I`ve sold many parts in the past, especially some expensive stuff. Do a search. I aim to please. Thanks to all for past purchases.
Thanks for looking!
-Chad
cdb95z28
Last edited by cdb95z28; 02-18-2008 at 02:04 PM.
#5
Are these "hardened" pushrods? Are the sizes any different than stock pushrods? I'm looking for some stronger pushrods to put in my 383.
How about $75 shipped? Shipping should be pretty cheap for these..
My zip is 55368, I can paypal immediately.
Please PM me, I may not check this quick enough.
How about $75 shipped? Shipping should be pretty cheap for these..
My zip is 55368, I can paypal immediately.
Please PM me, I may not check this quick enough.
#6
Registered User
Thread Starter
Join Date: Mar 2002
Location: Johnstown,PA, USA (Flood City)
Posts: 294
Being heat treated chromemoly makes them "hardened". I believe the stock size is 7.2" These are sorta an odd ball size as I had used them in my old solid roller set up. That`s why there is not much interest in them. They may just end up on the shelf for a very long time!
To have the proper length, especially if the engine is heavily modded, you should properly measure for the correct length.
To have the proper length, especially if the engine is heavily modded, you should properly measure for the correct length.
Thread
Thread Starter
Forum
Replies
Last Post
sleeperZ96BT
Parts For Sale
5
09-09-2015 08:28 AM