OK I'm cleaning the garage out and need to sell all this. PM or E-mail me offers. want to sell it all!

LS1 PARTS

-stock LS1 flexplate
-stock LS1 injectors from 00'TAsold
-LS1 ported TB--supposedly Shaner S7(no markings to be sure)sold
-stock LS1 crank have 2 (1=5.7 ready to bolt in, 1=6.0 needs turned/polish)
-stock LS1 rods/pistons
-stock 6.0 rods/pistons(same rod length aas 5.7)
-stock oil pump have 2 (5.7/6.0)
-stock timing chain have 2(5.7/6.0)
-stock 6.0 cam
-SLP 1 3/4" LT coated headers(has road rash)
-LT off road y-pipe
-Hooker aerochamber cat back(will make deal if you buy all 3)
-LS1 lifters 3 sets(will also fit LT1)
-stock LS1 valvetrain parts springs,ret.,locks,valves--2 sets
-LS1 Taylor Thundervolt plug wiressold
-LS1 4.130 JE forged reverse dome gas ported pistons.
-LS1 stock rear brake rotorssold
-LS1/6.0 water pump
-LS1 valve covers-3 pairs

LT1 PARTS

-Stock used clutch(trash) pressure plate(good) flywheel(good)
-Bad waterpump-housing good for electric water pump swap
-air pump
-AC compressor

4th gen parts in general

-Poly rear LCA bushings -new for stock LCA's(will fit 3rd/4th gen cars)
-Eibach lowering springs part #3831
-10bolt with 3.73's out of 00'TA non traction controlsold
-BMR LCA relocation brackets(I believe fit 3rd or 4th gen)
-air bag-passenger side
-stock front sway bar
-stock rear swaybarsold
-stock panhard bar
-stock torque arm

3rd gen parts

-complete grey front/rear from seats 91 Z28
-grey seat belts from 91 z28
-3rd gen spare tire(4th gen too)
-3rd gen dual snorkel air cleaner from 91 Z28
-3rd gen AC compressor,condensor,evaporator,lines
-3rd gen stock front swaybar from 91 Z28
-driver side air bag from 91 Z28
-stock 3rd gen starter
-stock/replacement alternator(was used 30 miles believe lifetime warranty)


OTHER PARTS
-used 28x10.5x15 slicks 2 sets
-1st gen/external regulator style Alternator--new
-SBC long style water pump-used
-Turbo 400 w/JW 3600 stallsold
-Front mount intercooler new 2"inlet 2.5" outlet--new
-8.8 4.30 gear -used

make offers!!!!

Badmire68@aol.com

 

I'm interested in the 3rd Gen gray seatbelts, if I can purchase the front receivers? Are they available? I need some that aren't cracked/broken, etc.

Thanks.
Eric

 

do you want the belts and reciever? I will chack and make sure I got the recievers. e-mail me an offer and what all you want. I will get them out and send you pics.

 

how much for the 3600 stall, the intercooler, and the 8.8 rear, does the 8.8 already have brackets for an f-body?

thanks

 

Are the relocation brackets bolt in or weld in
how much ?

 

How much for the 10 bolt with 3.73s?
" " for the Eibach lowering springs + are they all the springs or just rear?
" " for the turbo 400 tranny with stall convtr?

Thanks!
shooterpcb@yahoo.com

 

Can you do $150 shipped on the hooker cat-back? I can pay you this weekend if its in good shape. Any pics? LMK!!

Jeremy

 

ok I have updated the list. The turbo400 and converter is sold, but I think the guy would sell the converter for $300 shipped. the 8.8 is a gear only not the whole rear end.the intercooler will sell for $380 shipped. relocation brackets are bolt in. 10 bolt is sold. lowering springs are all 4. Don't really want to ship the exhaust, if someone wanted to pick it up I would let it go for $150 and it has a modified LS1 overaxle pipe to mate to a longtube y-pipe, but I have a spare LT1 overaxle pipe to go with it if someone has an lt1.

 

i emailed you about the relocation brackets. Consider them sold will send payment how ever you want

 

pics of the 3rd gen dual air cleaner snorkel
m21muncie4@yahoo.com

 

Sorry...I forgot to respond.

I just want the receivers, if the plastic casing isn't cracked or broken. I'm only interested if they're complete and in perfect shape. What I have now is cracked, so I don't want the same thing.

Do you have just the front receivers?

Eric

 

front belts are gone.

I will try to get you a pic of the aircleaner and send it to you.