romanss

I am going to try to get rid of the big items first. Obviously I can't sell the rearend before the body. Or computer before engine. I will reserve first come first serve. I would prefer to sell the big stuff locally or pick-up.

Ask questions.

This is off the top of my head, so I will have stuff to add later.

Engine:
441 NA 16.5:1 LS2 built by W2W
Custom Ross pistons
GRP alum rods with bolt upgrade
Lunati pro billet crank, lightened
billet main caps
Cam Motion Custom NA grind Cam
resleeved LS2 by R.E.D.
dry sump
afr heads
$11,500. I am willing to separate the dry sump system and heads.

Heads:
225AFR heads cnc'd by ET performance
titanium valves 2.150, 1.65
Jesel rockers
PSI valve springs
$2200 if not sold with motor

Dry Sump
ARE dry sump pan
Dailey pump
Peterson oil tank
prolite -20 lines (prob $700-800 in line and fittings)
$1800 if not sold with motor

Body:
custom candy blue paint with "real" flames
carbon fiber Joe VanOverbeek pin on hood
14 point custom chrome moly roll cage with swingouts
was certified a few years ago.
$5500 for body, panels, hood, cage, interior

Rearend:
Billinsley fab 9" rear narrowed 5/8 inch each side.
5/8 wheel studs
4.30 rear w/spool
35 spline axles, star flanged
$2,200

Trans T56
G-force internals 1thru4
Viper output shaft upgrade
Steel shift fork
billet keys
$2,500

Kooks stainless 1 7/8 to 2" step headers w/slip on collectors $800
(small dents and scrapes on collectors and 1 primary rerouted to clear steering shaft)
Borla XR-1 3.5 race mufflers $160/both(scrapes from touching ground)
McLeod "soft loc" clutch with alum flywheel $600
Pro5.0 shifter w/lous short stick $150
ARE tubular k frame and A arms $300
BMR extreme torque arm $300 (needs the crossbar)
BMR extreme sway bar $250 (needs the housing pads and frame brackets)(pending Jeff LSFFA)
60" competition eng. wheelie bars $100 (need the weld on housing brackets)
Wolfe Racecraft offset LCA's $170
Frnt/rear Hal 12 way shocks and front springs. $450
Custom DTS Chrome Moly Driveshaft $300
aerospace front/rear drag brakes $500
Aeromotive Pro-Series Fuel Pump, P/N 11102 and regulator $400
Summit 5 gallon fuel cell $50
BS3 engine management w/ wide band $1500 (pending)
29.5 x 10.5 slicks on 15x10 7.5 b/s weld draglites $500
26 x 4.5 Moroso DS2 on 15x3.5 weld draglites $300 (pending Jeff LSFFA)
front suspension limiters $30
Meziere blue water pump $300
Meziere painted black water pump (missing connector) $200
open trailer $1500 (will sell after car is gone)
TnT F2 ring with soleniods, ring, jets and 10lb bottle $400
10 lb NOS bottle. $120
Nitrous purge solenoid $80