Built 96 LT1

Thread Tools
 
Search this Thread
 
Old Jul 7, 2004 | 07:00 PM
  #1  
TexasLT4's Avatar
Thread Starter
Registered User
 
Joined: Jul 2004
Posts: 15
From: Tx
Built 96 LT1

I'm selling my 96 LT1, I was going to use it in a swap but I have other plans. Here's the list of mods:
The engine had 20k on it when i got it, since then it has been bored .030 over,blue printed and balanced, with 11.1 hyper pistons, LT4 HOT cam, 1.6 rockers, port matched heads and intake, new Optispark, new water pump. I also have all the wiring harness to go with it including the pcm. All sorts of other parts to go with it.

I bought this engine and I wanted to build this engine up and put it in my camaro, since then my plans have changed for school.

I have alot of time and money invested into this engine and would like to see it goto the right owner, I know there's alot of guys on this board that want to do LT1 swaps. I'll give you guys the advantage and post here before i put it on ebay.
Email me for any other info. that I may have left out.

Thanks - Trevor - TexasLT4@hotmail.com
Old Jul 8, 2004 | 09:27 AM
  #2  
TexasLT4's Avatar
Thread Starter
Registered User
 
Joined: Jul 2004
Posts: 15
From: Tx
I guess everyone wants the almighty LS1? Somebody has to want this engine. Any v6 guys? Somebody?
Old Jul 8, 2004 | 09:51 AM
  #3  
TheBeast_93LT1's Avatar
Registered User
 
Joined: May 2004
Posts: 380
how much ?


-Daniel
Old Jul 8, 2004 | 09:52 AM
  #4  
Old Chevy Lover's Avatar
Registered User
 
Joined: Mar 2004
Posts: 131
From: Chillicothe OH
What are you wanting to get out of it? What are the extra's that are with it? Have you had it running since all of the upgrades, or has it been fired? Do you have the software to tune the engine with for all of the upgrades? These answers might help with people being interested.
Old Jul 8, 2004 | 10:06 AM
  #5  
TexasLT4's Avatar
Thread Starter
Registered User
 
Joined: Jul 2004
Posts: 15
From: Tx
I can't go any lower than 2k, yes it's been fired. It had the PCM reprogrammed 2 times but PCMforless screwed it up on the second time when I got it back, so I had to buy a new stock one that needs to be reprogrammed. I just need it out of my garage. I paid alot of money for this engine and the upgrades and I want it to goto someone who will use it.
Old Jul 8, 2004 | 01:04 PM
  #6  
TexasLT4's Avatar
Thread Starter
Registered User
 
Joined: Jul 2004
Posts: 15
From: Tx
ttt
Old Jul 9, 2004 | 04:30 PM
  #7  
TexasLT4's Avatar
Thread Starter
Registered User
 
Joined: Jul 2004
Posts: 15
From: Tx
bump
Old Jul 9, 2004 | 07:20 PM
  #8  
TheBeast_93LT1's Avatar
Registered User
 
Joined: May 2004
Posts: 380
what did this motor run? what are the specs on the LT4 Hot Cam?


-Daniel
Old Jul 10, 2004 | 01:50 PM
  #9  
TexasLT4's Avatar
Thread Starter
Registered User
 
Joined: Jul 2004
Posts: 15
From: Tx
This motor ran a 12.7 in an 88 IROC. The duration at lash point is 279/287, at .050" tappet lift it is 218/228. The 1.6 ratio lift is 525/525.
Old Jul 10, 2004 | 03:21 PM
  #10  
TexasLT4's Avatar
Thread Starter
Registered User
 
Joined: Jul 2004
Posts: 15
From: Tx
bump
Old Jul 11, 2004 | 10:33 AM
  #11  
TexasLT4's Avatar
Thread Starter
Registered User
 
Joined: Jul 2004
Posts: 15
From: Tx
Nobody wants this motor? anyone? please?
Old Jul 11, 2004 | 11:01 AM
  #12  
TheBeast_93LT1's Avatar
Registered User
 
Joined: May 2004
Posts: 380
i'm interested. can you send pics of it, what the build up of it is, what compression, and sound clips of it. i definately would be very interested. thanks


-Daniel
Old Jul 11, 2004 | 04:08 PM
  #13  
TexasLT4's Avatar
Thread Starter
Registered User
 
Joined: Jul 2004
Posts: 15
From: Tx
Still for sale, anyone can have it... lots of time and money went into it, I'd like to see the right owner take it.
Old Jul 11, 2004 | 05:56 PM
  #14  
Daddy2K3's Avatar
Registered User
 
Joined: Dec 2003
Posts: 96
From: USAF in Little Rock Ark
Where you at?
Old Jul 11, 2004 | 07:20 PM
  #15  
TexasLT4's Avatar
Thread Starter
Registered User
 
Joined: Jul 2004
Posts: 15
From: Tx
I'm in central texas, and I can't ship this motor, sorry guys



All times are GMT -5. The time now is 12:58 PM.