Cam is hyd. roller with about one hour of run time!!! In great shape but I went bigger. Was originally a custom LT1 grind and the dowl pin has already been cut down for flawless gen I SBC use (duh, I used it )

I still have the cam card and the custom grind is Comp 3315/3316 on a 112 LSA.
.510/.520 lift
230/236 @ .050

If more info is needed please ask.
$200




Also, have a set of 7.400" Trickflow 1 piece chromoly pushrods. Practically new with same run time.
http://store.summitracing.com/partde...0&autoview=sku

$75

 

 

what would it take to make this work in an LT1 again?

 

Pull out the shortened dowl pin with pliers and grab a new LT1 style pin to hammer in

 

Bump

 

bump

 

Up