I have a 454 block from the early 70's. If there is interest in this I will get more info for you. Also have the cast iron heads and .030 domed pistons. post here or pm if interested. thanks

 

Will the pistons work with closed chambered heads? And if so are u willing to separate?

 

I will find out for you, unless you get the answer 1st. And yes I will seperate

 

From what I am finding, they will work. They appear to be Sealed Power Pistons, These will come with the Rods but no Rings. I will try to get you some pictures this week, I have to go to my storage unit to get them.

 

How much?

 

How about $600 for the Rods and Pistons(Complete) Plus actual Shipping via UPS to your location. LMK
Brian
Also includes the wrist pins, so Rods and pistons are al ready together

 

What is the casting numbers and the VIN pad stamp. Two bolt or four bolt? Oval port or square port heads?

 

Only question I can answer right now it the heads. They are oval ports. I will get the rest of the info today. Thanks for the interest in these parts.

 

Here is the piston info. These are made by sealed power: PN- H426CP
Ring dimensions 5/64, 5/64, 3/16
Dome Shape; .100 Dome w/ 1 relief
Compression dist 1.640
Deck Clearance .025
Skirt Clearance .0015

I will take offers seeing the price is high. Comes with the Rods and wrist pins.

Here is the block info: 2 bolt mains
Block has been bored .030 over, not appeared to be decked

T0607TSD
Break down:
T== Towanda Plant
06== June
07== 7th day
TSD== 75 to 77 Truck
Casting number===361959

This is what I have on the heads
Casting number==== 336781-- 73 to 85, intake 2.06 exhaust 1.72 open Chambered oval ports
Other numbers on head:
GM 9T
A29 74
Does not appear to be any work done

Make offers, prefer Local pick up, but will ship at your cost, US sales only

Also have a good Double roller Timing chain will adjustable timing
I do have pictures I am getting ready to upload now.

 

ttt

 

no interest? make some offers, this stuff has to go.