AFR LT1 190cc Competition Ported Heads
Thread Starter
Registered User
Joined: Dec 2002
Posts: 1,695
From: Gretna, NE
AFR LT1 190cc Competition Ported Heads
Im looking at upgrading to larger volume heads and wanted to see if i could get any interest before i pulled these heads off my car. These were just freshly milled (just enough to get them to square), with a 5 angle competition valve job, brand new brass guides, and new comp 987-16 springs were installed ~1800 miles ago. Of course titanium retainers and stainless valves (2.02/1.60). I bought these from Brook Foreman (aggiez28). He is a trusted board member and he told me that the heads only had 3k on them. I then took them and freshed them and have put about 1800 miles on since. These run $2500 from AFR and id like to see what kind of offers i can get.
These are on my car currently and i would pull them off imeadiatly after a small deposit is placed. I also have an intake that is coated torch red and polished on top to look like an LT4 and gasket matched that i could offer with the heads. There is a current 8 week back order on these heads and at a whole lot more money.
These are on my car currently and i would pull them off imeadiatly after a small deposit is placed. I also have an intake that is coated torch red and polished on top to look like an LT4 and gasket matched that i could offer with the heads. There is a current 8 week back order on these heads and at a whole lot more money.
Thread Starter
Registered User
Joined: Dec 2002
Posts: 1,695
From: Gretna, NE
Yeah im thinkin either 210s or 220s. Im staying with the stock ECU for now, so ill be spinning under 7k rpms so im thinking that maybe 210s would be a better choice? Thanks for the info on the GP tho,
Dan
Dan
Thread Starter
Registered User
Joined: Dec 2002
Posts: 1,695
From: Gretna, NE
Yeah thats lower than id be willing to go, typically thats what ported stock castings will bring. Id be willing to take a deposit and a later payment if you would be interested in doing something like that.
Registered User
Joined: Sep 2001
Posts: 223
From: Winnsboro, Tx
Originally posted by ddr698
Yeah thats lower than id be willing to go, typically thats what ported stock castings will bring.
Yeah thats lower than id be willing to go, typically thats what ported stock castings will bring.
Thread Starter
Registered User
Joined: Dec 2002
Posts: 1,695
From: Gretna, NE
z2894convertible - Well it depends on flow numbers and who did the porting here is a set for $1200 http://web.camaross.com/forums/showt...hreadid=229049 but they were ported by a well known porter and flow very well it seems, but anyway,
696redz28 and 1984camaroz28 im sending you both pms now,
Dan
696redz28 and 1984camaroz28 im sending you both pms now,
Dan
ill let you know if something happens to the deal,
Registered User
Joined: Mar 2003
Posts: 652
Re: AFR LT1 190cc Competition Ported Heads
Originally posted by ddr698
Im looking at upgrading to larger volume heads and wanted to see if i could get any interest before i pulled these heads off my car. These were just freshly milled (just enough to get them to square), with a 5 angle competition valve job, brand new brass guides, and new comp 987-16 springs were installed ~1800 miles ago. Of course titanium retainers and stainless valves (2.02/1.60). I bought these from Brook Foreman (aggiez28). He is a trusted board member and he told me that the heads only had 3k on them. I then took them and freshed them and have put about 1800 miles on since. These run $2500 from AFR and id like to see what kind of offers i can get.
These are on my car currently and i would pull them off imeadiatly after a small deposit is placed. I also have an intake that is coated torch red and polished on top to look like an LT4 and gasket matched that i could offer with the heads. There is a current 8 week back order on these heads and at a whole lot more money.
Im looking at upgrading to larger volume heads and wanted to see if i could get any interest before i pulled these heads off my car. These were just freshly milled (just enough to get them to square), with a 5 angle competition valve job, brand new brass guides, and new comp 987-16 springs were installed ~1800 miles ago. Of course titanium retainers and stainless valves (2.02/1.60). I bought these from Brook Foreman (aggiez28). He is a trusted board member and he told me that the heads only had 3k on them. I then took them and freshed them and have put about 1800 miles on since. These run $2500 from AFR and id like to see what kind of offers i can get.
These are on my car currently and i would pull them off imeadiatly after a small deposit is placed. I also have an intake that is coated torch red and polished on top to look like an LT4 and gasket matched that i could offer with the heads. There is a current 8 week back order on these heads and at a whole lot more money.
Thread Starter
Registered User
Joined: Dec 2002
Posts: 1,695
From: Gretna, NE
Actually ive already made a deal on these and am just waiting for a deposit. My asking price was much lower than $2500, that was just the list price of AFR's. Ill be sure let everyone know who was interested if the deal falls through,
Dan
Dan
Thread
Thread Starter
Forum
Replies
Last Post
dbusch22
Forced Induction
6
Oct 31, 2016 11:09 AM
oldschool
Parts For Sale
16
Feb 9, 2016 09:21 PM