95 LT1 fully built 383
Thread Starter
Registered User
Joined: Nov 2008
Posts: 263
From: Livingston, Louisiana
95 LT1 fully built 383
Alright, i'm listing this for my boss. The motor is a built 383 out of a 95 z28. It was built for a customer car. Now the papers for all the work were lost with some other stuff when moving shops so everything i'm going to list is from memory only. Keep in mind that there is way more than in the motor than i'm going to list. It was built to run with a blower the guy had on it, but could run with out it, hence the higher compression.
95 Lt1 block-bored .30 over, fully forged eagle rotating assembly, 9.6-1 cp pistons, with gapless rings
Lt4 heads-fully ported with 1.6rr. The heads were sent to be ported by a guy who used to work for him. He's not sure where but he know it cost about $2000 to have them ported.
Comp cam- LT1 xr269hr-12. adv dur: 269int. 276exh. dur@ .05 218int 224exh. lobe sep: 112. valve lift .495int .503exh
Lt4 intake
BBk throttle body 58mm
Bbk shortie headers
Aeromotive fuel pressure regulator
ATI super damper
New MSD coil
Good conditon taylor 8.2 thunderbolt wires
New opti and of course all new gaskets
Moroso oil pan. 7 quart I believe
Urethane motor mounts
All accessories on motor are included.
That all he know of the top of his head and from what i can see on the motor itself. He put over 10grand in the motor but will let it go for $5000 obo. We would rather not ship it but will meet within a reasonable distance. Motor is located in Hammond, La
You can pm me or call at 225-362-0149. Name is Chris
95 Lt1 block-bored .30 over, fully forged eagle rotating assembly, 9.6-1 cp pistons, with gapless rings
Lt4 heads-fully ported with 1.6rr. The heads were sent to be ported by a guy who used to work for him. He's not sure where but he know it cost about $2000 to have them ported.
Comp cam- LT1 xr269hr-12. adv dur: 269int. 276exh. dur@ .05 218int 224exh. lobe sep: 112. valve lift .495int .503exh
Lt4 intake
BBk throttle body 58mm
Bbk shortie headers
Aeromotive fuel pressure regulator
ATI super damper
New MSD coil
Good conditon taylor 8.2 thunderbolt wires
New opti and of course all new gaskets
Moroso oil pan. 7 quart I believe
Urethane motor mounts
All accessories on motor are included.
That all he know of the top of his head and from what i can see on the motor itself. He put over 10grand in the motor but will let it go for $5000 obo. We would rather not ship it but will meet within a reasonable distance. Motor is located in Hammond, La
You can pm me or call at 225-362-0149. Name is Chris
Last edited by 96SSIndeed; Oct 23, 2009 at 05:14 PM.
Thread
Thread Starter
Forum
Replies
Last Post
dbusch22
Forced Induction
6
Oct 31, 2016 11:09 AM
