Hey all..

I've been trying to build this car for about a year now and have lost interest. Heres at least a partial list of what I have...

Please make an offer on anything here...

Anything I list as brand new is still in the Box and Never Assembled.

1994 Camaro Z28 Roller- 77K Miles, Black and Red Cloth Interior, Fiberglass Cowl Hood. Welded SubFrame Connectors, Hotchkis STB, BMR Panhard, Rear-End Girdle, Cross Drilled and Slotted Rotors, 255 Pump In Tank, VERY Sharp Car. Will Post Pics ASAP.

396 LT1 Reciprocating Parts -
-Lunati Pro-Mod Crank - Fresh from the Machine Shop
-Lunati Pro-Mod 5.85" Rods - Fresh From the Machine Shop
-Ross -21cc Forged Pistons .030"- Appx. 1200 Miles, Excellent Condition
-Brand New Total Seal TS1 Rings
-Brand New ARP Rod Bolts - Purchased through Lunati
-Brand New Clevite Bearings -
-Block Work Done by Agostino Racing before I recieved it. - CNC'd Clearancing, Concreted to Lowest Freeze Plug. Fresh From Machine Shop.
-Gellner Engineering 4 Bolt Billet Caps.
-Brand New LT4 Extreme Duty Timing Set
-Brand New TCI SFI Certified Flex-Plate
-Brand New ATI Damper

Assembly Hardware ALL BRAND NEW!
ARP Main Bolts
ARP Head Bolts
ARP Oil Pan Bolts
ARP Intake Bolts
ARP Flexplate Bolts
ARP Dempener Bolt
ARP Cam Bolts
ARP Oil Pump Drive Shaft
ARP Oil Pump Mounting Bolt
Trick Flow Gasket Set


Heads
-Brand New Canfield 220CC w/ 2.08 Intake 1.65 Exhaust Valves, Ported By Stiegemeir Racing In St.Louis. 64cc Combustion Chambers - 1 and Only Set of 220 LT1 Heads Produced by Canfield. Will Post Flow Numbers to those who are interested. You will need to buy a set of offset Rocker arms from Canfield, they are $248 a set for all 16. Center Bolt Or Perimeter Valve Covers
-Brand New Moroso - MOR-68335 Perimeter Valve Covers

Exhaust
-Brand New Hooker Super Comp Long Tubes - Ceramic Coated
-Brand New Mufflex 4" w/ Spintech Single 4" Hidden Outlet and 4" Y-Pipe for Super Comps
-Breslin Header Bolts
-Earls Header Gaskets

Intake
-Brand New SLP Cold Air Kit (The One with 2 Pipes and 2 Filters)
-Brand New Trick Flow Elbow and Installation Kit
-Brand New Granatelli Mass Air Meter
-Brand New Holley 58mm TB

Chassis and Suspension
-Brand New BMR K-Member w/ LT1 Mounts and Standard Steering
-Brand New BMR Tubular Upper and Lower Control Arms - One Set is Adjustable I can't remember which.
-Brand New BMR Xtreme Duty Rear Control Arms

Transmission
-TH-400 w/ 2800 Stall - Bought this tranny from a friend, don't know much about it.

Fuel System
-Brand New LS1 Speed Fuel System, Braided Lines, Aeromotive Eliminator Pump (I Have 2 of them), Aeromotive Regulator, Filter, Kit to install on plastic Tank.

Other Misc. Stuff
-Brand New CSR Electric Water Pump
-Brand New Alternator Relocation Bracket
-MSD 8.5mm Plug Wires
-MSD Optispark Cap and Rotor
-GMPP Lifter Guides
There is a WHOLE lot More.. But I will post the rest if anybody show interest in this stuff.

Will Consider Trades.

 

interested in heads... can I see the flow sheet? what is the lowest you will you sell them for??

 

Will Post for all to see tommorow.

I left the flow sheet in the car which is at a buddies shop.

I have the numbers before they were ported and before the 1.65 Exhaust Valve though..

Here they are. These heads were a Rough Casting Designed to be ported so these numbers are pretty low.

Intake-
.700-289
.600-271.5
.500-257
.400-243
.300-193.5
.200-133
.100-67

Exhaust-
.700-269
.600-254
.500-248
.400-235
.300-192
.200-127
.100-63

 

I was under the impression that this part isn't out yet. Any pics?

 

I'm interested in the prices your looking to get for all of these items. Really I'm just interested in the headers. Will they go right on my 95 LT1 without any problems? (sorry new to the F-Body world).

 

id be interested in the rolling chassis and possibly the transmission and a-arms....shoot me a price and pics to

tonylittel@aol.com

also where are you located?

 

interested in the wires and cap and rotor, how many miles and how much for both??

thanks

 

Joe 97RA - You are correct.. I forgot that when I ordered those from Summit they were backordered. (This was about 3 months ago) It's been awhile since I have gone through the parts I have.

My apologies. They will be for sale though when I actually recieve them.

Sp3ak - Yes they will fit your 95, I will PM and E-mail Soon with a price.

tonylittel- Will PM and E-mail Soon.

sean1997ws6 - All are brand new, but as Joe 97RA Reminded me, I don't yet have the cap and rotor. They are on backorder.

I will go through this list later and put prices with everything. I was kinda hopin' for offers so I could get this over with sooner, but since there is quite a bit of interest I will post negotiable prices.

Go ahead and E-mail me with offers guys, I'm open to all offers.

If anybody needs pictures or whatever I can get those tommorow as well.

 

that exhaust # is with a pipe right? Those are insane, really good numbers out of a bare casting on both sides.

 

Yes that is with a short pipe. I was pretty impressed as well.. but these numbers are even better now that they are ported.

Thanx for the props!

 

how much do you want for the wires?

 

I paid 85.88 for them... I would like to get 65 Plus shipping. They are Brand new.

 

How much do you want for the 94 rolling chassis? Thanks

 

Could you PM me a price on just the mufflex exhaust.

 

interested in the car if you can send me some pics and a price